Search results

I just refretted an old acoustic. I expected it to cause some back bow but not as much as I'm seeing. Looks something like 1/32 to 1/16 or more like .020-.050 gap on either side of the middle hump. That seems like a lot for string tension to overcome. The neck had a very slight back bow...

So I have on old acoustic I'm refinishing from bare wood. After about 8 coats I started finding small bubbles after leaving it to dry. Sanded out and on my next coat bubbles appeared during the application. I used a cloth and wiped that app smooth, thin. I've refinished 3 electrics before...

Our church was robbed and now we have 2 sets of speakers running off one amp. The amp is a behringer a500. 500 w, 8ohm as mono. 350w 4ohm as stereo. 2 speakers are bose 32se, 32w 6 ohm. Short run. The other 2 are unknown on a very long run to our kids rooms. Wired parallel stereo. The...

Is anybody out there running 2 Windows, like 7 and 10 in a dual boot? I am seriously considering this. I have plenty of HD, 2TB. I am running 7 now. I want to install 10. And since somebody will ask why, I'm always, "If it ain't broke don't fix it" kind of guy. My recording platform runs...

So I've been using these JBL LSR305 monitors long enough to have an opinion (another wise guy). Specs are all over the net. I have to say that I have a very small room, not treated, and possibly the worst mixing environment you could have. So I do not need to push them at all. I like them a...

Let me know if there is a better forum for this. I opened my Dunlop Jimi Hendrix wah and made a small adjustment to the gear hoping to get a tad more on the high end. While in there I cleaned out the dust etc--air in a can type thing. Now the pedal comes on but doesn't WAH! Basically it sounds...

Just an FYI for anybody out there struggling to get a good bass sound direct. I moved up to Cubase 7. The VST Amp Rack has a Tweed model, use with the Tweed 4x10. Turn the drive down all the way, master a touch over at about 1 o'clock. Treble down a bit, or all the way down. Start there. On my...

I know plenty of people know this but for those who may not. If you have a multifx like the RP355 and you typically use the 1/4 cables out to your interface, try using the XLR out. I found out that the impedance is different. I did not want to pay the extra for the xlr cables but I am glad I...