Search results

Wow, 8 channel cards for 20.00 each... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=130155720572&ssPageName=STRK:MESE:IT&ih=003

I would like to know if it is an important thing to replace or atleast inspect the front rubber roller of the TSR-8? Im talking about the big roller right before the heads...but it has that ribbed rubber strip on instead of a big rubber roller like the pinch roller after the heads? I just had...

I have a couple quick questions. 1st. Will the reel platters from a 38-8 work on say models 32 34 34b TSR-8 and MSR series? 2nd What do you call the little digital tape counter thing on the 38-8? I assume the Digital Tape Counter but Im not sure.

Hi, I have a rubber roller for my 38-8 that I would like to sell but it appears to have a sticky substance on it that my rubber roller cleaner wont take off. It looks like ink almost. Like someone smeared drying ink onto the part that would contact the tape. I have tried my "Lasermedia RC-5...

Well After much thought Ive decided to sell my beloved Tascam 38-8. Ive had it for darn close to a month. I got it on Ebay...But there is something wrong with the motors. I dont feel right trying to sell it back to someone on Ebay just to pass it on. So I am parting it out. Problem is...I...

Can someone tell me how common the remotes for Tascam TSR-8's are? And how much to get 1 by itself? Just the standard remote. Thanks

Can anyone help a brotha out? What would cause a say Tascam 38-8 to slow down towards the end of a rewind? I cleaned and replaced the 2 rubber washers on the brake and motor solenoids. Is there a certain thing that wears out that needs replacing? Thanks

Hi, Can I hook up a Tascam DX-4d to a Teac 3340? Ive been looking and i dont see where to put the cascade cable? Thaks

Hi Ho Silver... I just picked up a mint condition Tascam 34b on Ebay for about $160.00. Thing is I look at the back and notice that I can just plug into the coresponding channel and record to that channel. But it ALSO has 4 ins and 4 outs. Just like my 38-8. My main question is about them...

High, Is it possible to bounce down internally with say the Tascam 34b or the 38-8 or even the TSR-8? Can a person do a 1 machine internal bounce to free up room to add more shit? Tanks

Hay, I know this is probably a stupid question but I dont know since I am new to RTR recording. The question is on an 8 track or any other for that matter...What tracks should I use for low frequency instruments and what ones for the Hi-Frequencies. There is supposed to be a preferd way. So...

Hey. Will Tascam 38-8 heads fit on a Tascam TSR-8? I know that the TSR only has 2 heads alltogether compared to the 3 of the 38-8. But could you still use 1of the rec/reproheads on the TSR? Thanks

Hey Yall. I just received a Tascam 38-8 with a cracked "Control PCB ASSY". So Does something like this ever come up on ebay? Or is the machine done? It appears to be the only thing wrong with it. Thanks

Dude... Someone just bought a Tascam 32 for $610.50 plus $75.00 shipping. WOW. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=130139051320&ssPageName=STRK:MESO:IT&ih=003

Hey, Can someone tell me if they sell the little springs on a tension arm for a Tascam 38-8? I had to take mine off and 1 of them is a little stretched. Tanks

OK...I know everyones glad to hear from me again...I received a M-30 mixer and am in the process of trying to figure out how to work it. I have gotten as far as hooking a mic to the M-30 and getting a signal on say track 1 on the 38-8. So I record and such. I go back in "repro" mode and...

Is it possible to change the motors between a 32 and 38-8? Would it just be a quick swap? Also is it possible to change the little tension arms out between the 32 and 38-8? I looked at them and they appear to just be 1 screw and 2 springs and it should be a breeze. I want to swap mine...

Hey, Is there anyway to take a 1/4" reel and use it as a 1/2" takeup reel? Im thinking if I take 1 flange off and put it all back together I can put it facing flange down. That should work. Anyother ideas???

Hey, I am looking into building myself a cabinet for my Tascam 38 and NR units. I am thinking I will go with wood. I have found a perfect base already prebuilt an Mills Fleet Farm. I believe it will be perfect. It is 18" accross and I believe 30 inches deep. Anyway I plan on fixing the...

Hey, I want to check my new 38 to make sure that the channels all work on it. But I still dont have a proper mixer. I am still planning on using my digi-002 mixer but I need snakes/cables. Is there a quick and easy way to test each channels rec/play function with only 2 rca cords? Thansk