Search results

Hey , Thanx for the Tip , It looks like it is a half Rack Space and only has Gain and Volume , I need something that will Fit in a 19in Rack and has at least Tone controlls , I have a Pretty good sounding Tube preamp that I built that has lots of features like analogue speaker sims and a DI but...

Hi Guys , Im looking for a good sounding but not terrorably expensive rack mount guitar preamp , preferably Tube based ...... I don"t need a Lot of features , 2 channels with a Foot switch would be nice but I could get by with one channel .... Something good for Hi-Gain metal tones , I"ll be...

If you are going to be doing it in your living room then why not use your computer ?? You can get a unit to connect to your PC with 8 mic inputs for about $300 ish , it should come with software and there are some free ones and free effect plugins on the net then you can spend the rest on other...

I Used a 1:1 Input Transformer , I salvaged it from the Mic section of an old Akai Mixer ......

Hi , I really don"t understand either of your questions , Maybe elaborate ??

I believe they used transformers to unballance because if the Mic has a transformer in it (SM 57/58 and many other Transformer Ballanced Dynamics) and you disconnect The negitive lead and just use Posistive and the Ground the Mic won"t work , with a transformer ballanced Mic both the negitive...

Hi richard , I think you have it mixed up a bit , You loose signal when you plug a High impedance source into a Low impedance Amp ..... A High impedance Amp Needs very little current to drive it , Alternately a Low impedance source supplies much more current/Voltage than a high impedance...

Richard , I"m not saying that what you are saying won"t work because it will all I"m saying is that it probably isn"t necessary ......

You should be fine with the mic the way it is , if your 3440 has an input impedance of 600 ohms and your standard moderm mic has something like 150 ohms output impedance then the match up isn"t really all that bad ...... A low impedance signal into a high impedance input isn"t a really a...

The Bogen Mic preamp modules I racked up aren"t anything special to look at , It is is a Wooden box with lopsided edges , Totally utilitarian , If I get a chance I"ll post a pic of it and one of the Preamp Cards as I still have 2 of them that haven"t been racked ..... Cheers

Everyone is different and sets up there drums different .... I personally have my Hi hats as high as I can get them because I am 6 foot 5 and everything else is high .... I probably have less than 1 cm of space between my top and bottom hi hat because I play all lot of double kick and play my...

I bought 6 Bogen Mic preamp modules a couple years ago on e-bay for $1 each ... They were Transformer ballanced input Mic preamp cards with screw terminals for the Mic and had High and low cut filters and 20db-54db of gain , I put XLR Connectors on 4 of them and Mounted them in a Box with a...

Yes that will work without a problem ....

Firewire is more than fast enough ..... Also Take into account that in a Lot of cases you can not use 2 different interfaces at the same time, some interfaces will let you run more than one of the same interface but not 2 different interfaces , so there is a good chance you won"t be able to use...

I think they are saying that you can link another Moto through the firewire but it would be cheaper to use the ADAT on the Moto with a ADA8000 to add another 8 preamp channels , an ADA8000 will only run you about $200 .....

Is this just so the members of the band can play allong with recorded tracks just for practice ?? or is it to Play recorded tracks so the band can record accompanying Tracks ?? if it is the Latter then I recomend some headphones and a headphone amp , Why?? well if say you are Playing a Bass...

Well I can give you a very basic explanation of the circuit that might be somewhat flawed ..... This curcuit uses a N Channel Jfet and a Phaze splitter to give a positive and negitive output ,R3 and R6 set the input impedance and Input Bias , C4 Blocks DC and create a Filter in conjunction...

If your amp puts out 100w into 8 ohms that means it will put out 50w into 16 ohms .... there is no problem running into a higher load ...

There is Paralell wireing and there is series wireing and combinations of the two, two 8 ohm speakers in Paralell is 4 ohms , two 8 ohms speakers in series is 16 ohms , if you take two 8 ohm speakers and wire them in paralell and thake another two 8 ohm speakers and wire them in Paraell and then...

I have absolutly no idea what they are called but I have seen them at every music store I have been in (Tommy lee , Long & Mcquade) ... they look like yer average strainer accept they are 3 or 4 times as wide and they add a huge ammount of snare attack compared to a regular strainer , I like...