Search results

Re ADAT I/O Cards The Dakota by Frontier Designs The RME Hammerfall Card I also believe the Ego Sys Cards have optinal ADAT The Soundscape Mixtreme also has an ADAT Opt. Terry Cano

O.k., anyone used the Aux Bus? Where does it Return? Does it use an Insert Cable (TRS) and return on the same Jack? Musically Terry

Well if the bars are moving then you are in the correct place and should be hearing something. There are three ways to measure where you are at (tape counter) ABS absolute, MTC Midi time code and Bar/beat When you set up the VR you choose... I suspect the problem is in the Tascam....Digital...

Sounds like everything is right....one "Do Dah" question. When you hit play after recording....do the bars in the track on the VR800 indicationg that there is signal? If "No" then make sure you're in record mode... the red light under the track will flash when in stand by....but changes to...

Can you record into the VR800? Are you having problems going into and coming out of the VR800. Did you set the sync on both units? Terry

What mixer are you using? Do you have the ADAT cables plugged in? Do you have the Sync (BNC) cables hooked up? Terry

That maybe your answer....put it into sound forge create the click on a seperate track and lay it back on the VR....or how about manually putting the click in on a track on the VR with a cowbell or wood block? Terry

It ain't going to happen. There's no sync on the CD to lock the VR to. CD's don't have a time code on them. There are other ways perhaps. What are you trying to do? Terry

No, I have both programs installed 'cause I teach Cubase and Cakewalk....this is what is so EMBARRASSING. I can't get Cubase to record the MIDI onto an Audio track. I have went thru all the settings in Cubase and the Audio Card...hundreds of times. Of course it would work with two...

It's not the card. It works perfectlt with Cakewalk but not Cubase. Terry

Hmmm....it doesn't work for me. I can record audio fine but not record the MIDI file in the open arrange windo to the Audio track in the same arrange window.....SB AWE 64 card....not the greatest but it should work. Terry

How do we know whether sync is from ADAT? The VR800 use's word clock to scynec to the mixer (VM200) so what will sync to the computer if the card has word clock Terry

Okay, this is a really stupid question....where is the on-line docmentation? I thought it was refering to the Acrobat file that you install from the CD...but that's not "On Line" also that docmentation refers to ""On Line Documentation" So where is it? Steinbergs site? Terry

I'm trying to record the MIDI files into an audio track in the Cubase. It works in Cakewalk....for some reason wont record in Cubase.....any suggestions Terry

How much RAM and what is your Hard Drive? If the Audio data is plenty.....many tracks high sample rate then you need lots of RAM otherwise you're writting and getting data from the HD SCSI drives used to be the fastest....not true with the new DMA bus....However, not all MB support the DMA...

lee, Your recordings are Excellent. Playing is excellent. Good Phrasing and notes. Good Job. Musically Terry Los Angeles CA

A mixer is always nice.....not needed except for getting the Analog signal into the computer.....A/D convertor. There are A/D convertors available.....check Frontier Designs, Echo, etc. For mixing this is less important....mix software (Sonic Foundrys, SoundScape, products, etc.) usually...

I don't know n tracks but I would think: Set N tracks to record mode....set synce as computer slave.... Go into record mode....you'll probably get some message saying waiting for sync.... start Fostex and computer should start.... The Sync will probably have to be MIDI or SMPTE I don't think...

S/PDIF vs. Light Pipe S/PDIF is two ch. Also, the connectors on the Fostex are propbably RCA Optical cable and the sound card is probably Cox with a Minature plug. There maybe compatability problems. There are some very inexpensive cards out there now that are ADAT Light pipe (8...

I have my orig. manual for Atari Ver. 2.0 Actually back then the manual was really a good tutorial. $15 plus shipping. Musically Terry