Search results

Has anyone got a copy of the remote control protocol for the Fostex 4030 Sync Unit? There is a reference to it in the user manual but I can't find a copy of the protocol anywhere.

Just a ping to see if anyone with an R8 can help?

I've got a great little R8 tape machine which is working well apart from one issue. When I go into slow or fast forward spooling, there is a tendency for the tape to move downwards. to the extent that it will run on the bottom collar of the metal tape guide (the guide just to the right of the...

I’ll give that a try. I’ve also found someone else nearby who has an R8 so I’m going to visit and compare the tape path on their machine.

I think a video would be great but I guess would show that the clearance is really small or non existent. I really need another R8 owner to check the clearance on their machine.

Yes but the capstan spindle is still rotating when the R8 is at stop. That’s why I’m concerned about the clearance.

Thanks for the photos Rob. I think the manual shows the tape path with the pinch roller engaged, so you would expect the tape to be touching the capstan. Are the photos taken from your machine?

Could anyone with a Fostex R8 please have a look at this thread and reply if possible. https://homerecording.com/bbs/threads/fostex-r8-capstan-spindle-to-tape-clearance.421431/#post-4772913 Thanks

Thanks for the reassurance but I am a worrier! Let’s see if we can get someone with an R8 to check the clearance on their machine.

Picture of the entire tape path is attached. With the pinch roller not engaged the tape is either touching or so close I can't see the gap.

I've just bought a Fostex R8 and have noticed that the clearance between the capstan spindle and the tape is close to zero. Of course I mean when the capstan roller is not engaged against the capstan spindle. I've attached an image. (yes I know it all needs a good clean, I'll get to that!)...

And more progress! I found a guy who is doing a similar project and has uncovered the Tascam Accessory2 port commands for remote control. Have a look to https://github.com/bgencarelle/Tascam-MIDI-bridge When I get time, I'll write up the list of codes (which are hidden away in a software...

I'll close this thread and point you to https://homerecording.com/bbs/threads/tascam-238-story.384207/page-2 which covers the same topic and has new information. Go to the latest posts.

I can't see how to delete the thread. I can edit my post but can't see any delete option.

Okay I made some progress! Whilst the RC-88 remote port on the Tascam 238 could provide one way to access the machine for remote control from my DAW, I found out from Tascam that the Accessory2 port on the 238 (and all later Tascam Multitrack Machines) actually contains two comms circuits on the...

Thanks for the explanation. I probably didn't explain what I'm trying to do very well. I would use a Tascam ATS-500 Synchronizer to allow the 238 to be slave locked to my DAW (Cakewalk) which would provide the master LTC timecode source. However, what I want to do is also control as many of...

Can I ask if you ever came across a copy of the 238 Serial Connector protocol? I want to control a 238 from my DAW system.

Can anyone help with a copy of the Tascam 238 Serial Port Protocol. It is mentioned on Page 25 of the User Manual but says you need to contact TASCAM for detailed technical information. I will try contact them but don't hold out much hope of Tascam having a copy after all this time. Any help...

Thanks, I'm sure it will be okay.

The machine I am looking at has the timecode board. Yes I have a PC utility that converts MTC to LTC. What I can't find is any reference in the user manual to how to slave lock the Nagra to LTC during playback.