Search results

for $255.99 and $15.83 for shipping...cant wait to get it.... just thought id share...

I have attatched a couple of drawings here....the first is my current setup. I track drums and guitars in the 13' X 13' and mix in the larger 22' x 13' room and dont really use the 4' X 6' closets for anything. I have thought about remodeling the mixing room to get a couple of more usable...

last weekend in a recording session, I was re-arranging a 57 in front of a guitar cab and it took a nose dive into the floor...the wire mesh tip is bent down on one side. I can still get a signal from the mic but it is really harsh and thin sounding....any thoughts???

How do you guys do it?? I recently set up my second delta 1010 and its working perfectly with one exception. Im not sure how to monitor it. I have my monitors connected to my 1st delta and can hear everything that goes into it. I know I could use a mixer or something to route both cards to...

I just recorded these for a local artist yesterday....These are completely dry...the only thing I have added is a little compression to the snare. I know there is a ring in the snare that I have to EQ out but Ill get to that once the rest of the tracks are complete. Just thought Id share...

I am not a bass player...though I played one on this particullar night in a mid-sized town in the Upstate of South Carolina....just filled in for a few shows while some friends looked for a permanent replacement....anyway....on the night in question, my borrowed bass amp crapped out....so the...

SP B1 - $75 + shipping AT3035 - $110 + shipping I tried to sell these mics here several months ago...had a few bites....had 2 deals fall through....thought Id try again. any takers this time??? prefer paypal....

I recently found out that one of the engineers where I work is into electronics...and also a pretty good drummer.....After finding out about his electronics experiance, we began discussing the DIY mic pre's that I had seen here on the board and we decided to build one. My job was to find the...

a local music store has some of these in stock and I looked at some today....they look really nice and are reasonably priced.... I did a search hear and only found 2 threads which mentioned the mic....neither really said anything about the mic....just made mention of it.... Im interrested in...

over the weekend, I tried to connect my second delta 1010 to my system. I installed the card, it was recognized and the drivers were installed. I connected the breakout box and everything powered up fine. When I started a session in Adobe Audition, I went to my inputs preferances and saw all...

when porting a kick drum, is there any reason for where you put it?? I see some people put it towards the edge, some more towards the center...some even put in 2 or 3 ports....what are the reasons? Im not a drummer but I do have a kit in my studio. I dont have a ton of kick heads laying...

haha...bet you thought these were speaker monitors...:p nope...I have two or three 17" CRT monitors for free to a good home....you will have to pick up in Upstate South Carolina, or pay for packing and shipping. if there are no takers within a week or so...they go to the salvation army....

http://cgi.ebay.com/OWENS-CORNING-703-RIGID-FIBERGLASS-INSULATION-OC703_W0QQitemZ200055345937QQihZ010QQcategoryZ63894QQssPageNameZWDVWQQrdZ1QQcmdZViewItem somebody get this before its too late!!!

I understand that the tweeters should be at ear level. However, I also know that some people place their speakers on their sides....when you do this, what seems to be better to you??? Tweeters towards the center like figure 1, woofers towards the center like figure 2 or does it even seem to...

sorry...double post.....

Once again.....I have a Terratec EWS88/MT Mult-tracking soundcard.... 8 analog ins and outs Digital in and out midi in and out original box, original owner, factory software included $200 shipped....The breakout box takes RCA plugs so ill throw in an 8 channel snake with RCA on one side and...

I recently watched Ethan's video on setting up a listening room, and Im just about to start moving all my equipment into my room....if any of you have read some of my recent threads in this forum...you know why Im moving...anway...In the video, I remember Ethan saying that the distance of...

only selling one of these...so once one of them is sold...the other is off the market... $90 for the B1 $125 for the 3035 these prices included shipping....

I should be recieving some mineral wool and 703 next week but I want to start building the frames this weekend. I just have some questions on the exact sizes to build them. If I build frames that are exactly 2' X 4', will I have any trouble getting the sheets in them? I ask this question...

looks like I may have been duped into buying a Delta 1010 break-out box on ebay....I didnt realize that it was just the box and did not include the PCI card. Does anyone know where I can purchase the card OR....what would be nice is if the card for the 1010LT will work with the breakout box...