Search results

Only building something to keep out most of the exterior noise will do. For making a better sounding recording space you can just use duvets. But if exterior noise is present then you are wasting your time.

There are no speakers on this system. All use is headphones.

I tested for circuit electrical 'ticks' by removing mics and sitting for ages watching Reaper and nothing. I have tried two different mics and removed anything that could cause this one by one. Thats how I got it down to the first Ben* monitor. To be fair this Len*v* monitor was only 90.00...

Dave no this is a brand new wired and tested build. The whole building. My set up is ....mains 3 pin plug ......to monitor. It is not an electrical 'tick' on the circuit. This 'tick' is being picked up by the mic in the sound booth where the two monitors are approx 2 to 3 feet from the mic...

In studio there are two monitor screens. One to read off and one for reaper. On recordings there are occasional clicks which after lots of isolating was put down to one Ben* monitor. So a quick trip to shop for another monitor replacement. This Len*v* monitor does same and clicks even more...

At this stage it is going to get hit by a sledge hammer. You wouldn't believe how much work this has affected if guilty.

Thank you. Thats what I was suspecting ....or.....it was making the system more sensitive so picking up the outside noises. BUT !!! ........... Some recordings have had strange noises like mouth clicks and in a bad way. Today I went into soundbooth (no speech, just empty sound booth) and...

The booth is timber construction Gecko and deep noises do transmit. The pc and ups are outside the booth and I think it could be them....... BUT ..... On recordings just over 18 months back the 'hum' is barely even noticable. The only difference now is that the gain has changed because it's...

I call it a hum GT. It is like a fan hum. It is the only sound there besides clicks and breathing. :unsure::unsure::unsure:

This is inside recording booth where there is nothing but 2 x monitors with no fans. No extraction on. Just nothing. The noises you here are switches being flicked and somebody trying to be as quiet as possible. The background hum is what I refer too. It as if there is a pc fan blowing in...

I am becoming obsessed with this but what causes a faint low background hum on a recording that IS NOT present when recording takes place? We have isolated sounds that bleed into the sound booth etc which are at -60 and below. But on playback behind the voice there is that hum which needs to...

Pity you can't sing or play a note.:LOL: It looks more like a rock stars living room than a recording studio. It is very nice though and you have finished it admirably. I couldn't play one instrument. I look on with envy at someone that talented to play half of what you have there. Well...

sorted thanks

I see. I haven't noticed anything down on the system in the way I use it. I would be interested in what the results of your experiment is.

We use an Audient 14 the mk1 type and it is routed through the 286. At times when I didnt use the de-esser in the 286, I dearly wish I had. Although lots of things can be done in post processing, it is much better not to have to do them. Are the pre-amps better? I think that is the least of...

Depends what you want. I looked for lots of stuff and wasted many hours doing so. In the end I just purchased them Royalty Free and got some of my life back.

Sorry my single brain cell is getting slower so please ignore...................Where has delete gone mods?

Has it got the correct amount of pins to sockets?

Could just open the window? :P

I am just thinking out of my head and clutching straws here but I can tell you what I have experienced. I owned a Focusrite briefly. The odd time I hit a snag and through my inexperience couldn't figure it out. I decided to sell it for something that was supposed to be better. Later and...