Search results

Does anyone know for sure if their PPM meters- indicate gain reduction? I presume they are, but the odd thing is they can show reduction (presumably of peaks) but almost regardless of how slow the attack is set, which doesn't seem to add up with the attack settings.

Found these for cleaning up the racks. It's nice eliminating some of the power wiring.. Y Cable-Male Edison to (2) Female IEC-YIE 406 [YIE406] - $7.59 : TheTapeWorks.com (Actually a Hosa product Power Cord Y Splitter NEMA 5 15P to Dual IEC 320 C13 6 ft | P006-006-2 | Tripp Lite That along with...

Just wondering what happens acoustically to foil faced fiberglass boards when you double them up foil sides together? I.e. if fiber of one at 1.5" deep is effective down to 'x frequencies, are the two similar or the same as glass 3" deep? :eek: I should know this by now..

So with an external HD caddy, which has its own on-off switch, and I'm pretty Shure I've done this w/o a problem so far just want to get a reality check here.. With the p/c on, drive caddy off, turn it on with a drive in it, the drive comes up. -might have to close and reopen explorer maybe...

:p It's actually what you call a delay relay - or time delay. It's out of an old air conditioner built in the early 80's. Tubes, amplifiers and such in control circuits were phasing out about then. You can see the heater coils in the first one and sort of see the contact points in this second one.

Astatic 827A Cardioid Miniature Condenser Gooseneck 827A-17 B&H...

I just noticed this. Looks like it has some really cool features. PSP Echo I always wish for delays, a pan for each please.. But for that, maybe looks like a good one.

Time intensity trading | Auditory Neuroscience :guitar:

I need to make some small dia wire rope loops 1/16 or 3/32" to secure/tie downs. What's an easy way to seal the end from unraveling? Don't think I want crimp on' - although that might work, they need to fit into releasable clips I'm about to check out. 'Brazing - ick. Maybe dip them in an epoxy? :)

So I was considering putting a couple of old D-120's back into guitar amp service and just found out,, or relearned perhaps :eek: that these (70's) JBL's could have lost maybe half of the magnet strengths by now! So I Googoo'd it.. Speaker Magnet Recharging Done Easy :):p

I was over at HomeTheaterShack - home of the very cool REW app, boning up on doing speaker measurements (as opposed to room' .. getting ready to shoot' my guitar amp :wtf: Later on that :rolleyes: REW for testing a full range speaker. - Page 2 - Home Theater Forum and Systems -...

Out the back of my Boogie' > this, Furutech Power Flux 18 Power Cord 1.8m by Revolution Power :listeningmusic: This is going o sound sweeee-t! 'Course I'm no foo'.. always pack my extension' ya know, just in case.. http://www.cyberguys.com/images/detail_images/p48459a-1.jpg

" The PRESENCE control is a high frequency attentuator that is placed at the end of each channels pre-amp stage and affects frequencies higher than.. (etc.)" Is this otherwise done as a neg feedback loop in the output tubes? (or 'around- not sure of the terminology

I'm thinking of making use of a D-120, raw cab options. Just barely srtarted looking .. :guitar:

I been wondering about something I've observed, and was talking to a few other players about; and that's amps seeming to have less clean headroom as a night goes on, and rumors and speculations that it could be partly due to the amp's build up of heat? Now its also reasonable that other factors...

Pair of Speakon Jack to 1/4 Inch Female Adapters | Convert Mono Speaker Cables to Speakon | 2 Pole Wiring By decent I simply mean actually make a secure connection on the 1/4" TS end, as opposed to the ones based on these for example, Switchcraft 121 1/4" Mono Cable Mount Jack Large Body which...

AKG Model D 202 E1 and D 222 I got to hear these at a local PBS function.. I didn't know what they were but recognized what looked to be the old AKG head style and looked them up. I was very curious when someone got right up on the mic and the tone stayed the same! I had heard about the dual...

I'm trying to keep an old PC DAW going by adding a SATA drive. The searches all seem to be aimed at attaching a SATA adapter and drive on to the IDE cable, but it looks like it has to be one drive, and the master. But can you keep the existing C' drive and add a SATA second drive?

I had this condenser from way back and never got on with it on live vocal, but lookie here.. Folks in for a four piece live in the house, doing a 'comfy old style is the call. He gets a real nice (best/most usable I've come across so far) tone on his p/u, and last time in we used that and the...

Visualization XY stereo microphone system - Stereo recording angle SRA visualisator - sengpielaudio It's a dandy. I'm setting to record our band's live gig, and it'll be 'set and go with almost no chance of audition' and review. I never used fig-8's for kit overhead before but my aim is for the...