sweetbeats's latest activity
-
Yes, exactly as you described. Basically, anything I described as white initially is actually the off-white putty color. I just didn't... -
I was able to straighten all the fader shafts, so I'll just need the caps. Yes dark brown for everything. The non-detent pot will be...
-
sweetbeats replied to the thread Tascam M-308B, M-312B, M-320B PARTS!.Last question: on the fader knobs, you’re talking about the off-white or putty-colored ones with the dark blue stripe? There aren’t...
-
sweetbeats replied to the thread Tascam M-308B, M-312B, M-320B PARTS!.Im just guessing you need the dark brown version switch and knob parts. I can’t really tell from the pic…too far back. Have you tried...
-
sweetbeats reacted to rob aylestone's post in the thread Coax (BNC) cable impedance question - for level not clock with
Like.
I have been smiling a little on this topic. Signal generator, audio voltmeter, lots of discussion over different specifications of... -
sweetbeats replied to the thread Tascam M-308B, M-312B, M-320B PARTS!.5x white faders: do you mean fader caps? Or you need the faders? Or both? 2x red switch caps: I have these. But is the body of your...
-
sweetbeats reacted to rob aylestone's post in the thread Coax (BNC) cable impedance question - for level not clock with Like.
In radio frequency circuits, the correct impedance is vital, but in audio frequency use, im not sure any of my test gear could detect...
-
sweetbeats reacted to ecc83's post in the thread Coax (BNC) cable impedance question - for level not clock with Like.
It's the wavelength innit! Given by, in theory c/f where c is speed of light and f the highest frequency of interest. So for 20kHz that...
-
sweetbeats replied to the thread Tascam M-308B, M-312B, M-320B PARTS!.Sorry. All the metalwork is long gone including the dress panel and that escutcheon. It’s just PCB assemblies, faders, knobs, switch...
-
It's not quantifiable but I thought the console sounded just fine before recapping and replacing some regulators... but ever since...
-
sweetbeats replied to the thread Yamaha MT100 II crackling noises when recording.Hi. Does this also happen when you are listening to audio at an input, or does it only happen when you are monitoring tape playback?
-
So I got my power supply recapped and two new regulators. I also, at @sweetbeats suggestion, cleaned up the contacts on the umbilical...
-
sweetbeats replied to the thread Tascam 34 - meters doing strange things.Yeah…here’s the thread on it…which is too much for anybody to read, but it’s the most comprehensive information set on it...
-
-
sweetbeats replied to the thread Tascam 34 - meters doing strange things.Sounds good. And the Tascam console…ahhh you’ve incited the nerd in me…you’re talking about the 12x8x2 prototype inline console...
-
sweetbeats replied to the thread Tascam 34 - meters doing strange things.I completely understand. I didn’t realize you were going to be passing the machine on after your project. You probably said that. FWIW...
