sweetbeats's latest activity
-
sweetbeats replied to the thread Help Modifying Tascam MS-16 with Multispeed Switch.What are the specs on the 60-conductor cable and where did you get it? I want to make a 50ft ELCO extension cable for my RC-51. Thanks... -
sweetbeats reacted to AnalogApples's post in the thread Help Modifying Tascam MS-16 with Multispeed Switch with
Like.
I used the thread here detailing the mod. This is the second MS-16 I’ve done this too with no troubles. The guy that did the mod... -
sweetbeats replied to the thread Help Modifying Tascam MS-16 with Multispeed Switch.Can you post a link to the mod thread you’re talking about? And I understand better now what you are doing with the speed control mod...
-
sweetbeats replied to the thread Help Modifying Tascam MS-16 with Multispeed Switch.So you modded the cards back to 15ips. So why incorporate the easy access speed change mod? 15ips is where it’s at for that machine...
-
sweetbeats reacted to AnalogApples's post in the thread Help Modifying Tascam MS-16 with Multispeed Switch with
Love.
Forgot to mention I modded all the amp cards too. (Modded to 15ips) Kinda glad I forgot to mention that, because that was an excellent... -
sweetbeats replied to the thread Help Modifying Tascam MS-16 with Multispeed Switch.Right…a DP3T switch means double-throw, three or triple-throw. Basically 2 independent sets of common “outputs” if you will, each with...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.You get what you pay for. I would not buy the cheapest cables you can find in whatever online marketplace you choose. They will not...
-
sweetbeats replied to the thread Son Of Tascam 58 Story....As detailed in an earlier post I had Terry Witt refurbish the pinch roller. Well, I decided the counter roller needed refurbishment too...
-
-
sweetbeats reacted to rob aylestone's post in the thread Solved my high pitched whistle ;) with Like.
There's no direct electrical path at all between in and out so any of the usual interference problems can't happen. We used to use...
-
sweetbeats reacted to rob aylestone's post in the thread Solved my high pitched whistle ;) with Like.
Things like these have been around in telecoms for years The low impedance sources work transparently - but of course feeding a high...
-
I don't like their rip off tactics either, my old firm, Blackstar have had amps "cloned" and there is little one can do on a "global"...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.I agree 100%. And yes Model 2 series is unbalanced 1/4” TS phone jacks. To connect a balanced mic and keep the signal balanced up to...
-
I believe the Model 2 mic inputs are unbalanced 1/4" jacks, not balanced TRS jacks. So you would need XLR to 1/4" TS. Again, if you...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.Just to be clear, my comments about Behringer have nothing to do with “a name”, but rather substantial failures in near-new devices...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.+1 to the Yamaha…well-made, reliable, good bang for the buck…good performers and very affordable.
