sweetbeats's latest activity
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.You get what you pay for. I would not buy the cheapest cables you can find in whatever online marketplace you choose. They will not... -
sweetbeats replied to the thread Son Of Tascam 58 Story....As detailed in an earlier post I had Terry Witt refurbish the pinch roller. Well, I decided the counter roller needed refurbishment too...
-
-
sweetbeats reacted to rob aylestone's post in the thread Solved my high pitched whistle ;) with
Like.
There's no direct electrical path at all between in and out so any of the usual interference problems can't happen. We used to use... -
sweetbeats reacted to rob aylestone's post in the thread Solved my high pitched whistle ;) with Like.
Things like these have been around in telecoms for years The low impedance sources work transparently - but of course feeding a high...
-
I don't like their rip off tactics either, my old firm, Blackstar have had amps "cloned" and there is little one can do on a "global"...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.I agree 100%. And yes Model 2 series is unbalanced 1/4” TS phone jacks. To connect a balanced mic and keep the signal balanced up to...
-
I believe the Model 2 mic inputs are unbalanced 1/4" jacks, not balanced TRS jacks. So you would need XLR to 1/4" TS. Again, if you...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.Just to be clear, my comments about Behringer have nothing to do with “a name”, but rather substantial failures in near-new devices...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.+1 to the Yamaha…well-made, reliable, good bang for the buck…good performers and very affordable.
-
The Dual RP uses phantom power, which the boards don't supply, and they don't pass that power through. They are designed to boost...
-
sweetbeats reacted to Scott Baxendale's post in the thread TEAC A-3340S what mixer to use? with Like.
I started out on a 3340. For several years I used it without a mixer and plugged mics into the 1/4” inputs on the front. Then for...
-
sweetbeats replied to the thread TEAC A-3340S what mixer to use?.No disrespect intended, but I disagree with that suggestion entirely…first, I don’t believe the OP is looking for or needs a 32 channel...
-
The MB-20 is a worth while unit but I strongly disagree about the Model 2 and 2A. Their performance is subpar and is very prone to...
-
sweetbeats replied to the thread TASCAM M-520.Yes. Of course you can. That’s what the PGM ASSIGN 1-8 switches do for you. Each of those switches assigns or sends or routes the signal...
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.Yep. 100% true. I often bring that up and ask about the test equipment. I thought that was touched on but now I’m not seeing it…maybe...
