Thanks for your patience with me. I need to make sure I have a clear understanding. while playing back a tape, I turned up channel 3 of the monitor mix, and set the monitor source switch to the down position (Red LED On) and I get no output to the phones on any channel, including channel 3...
Another interesting piece of information. When I press the monitor button in or out I get a loud pop from the speaker and the Vu meter on track 3 pins momentarily.
I am able to hear an output from channel 3 on the PGM out. I still have no activity on The vu meter during playback though, only during recording and monitoring of the inputs. I also just discovered that I cannot pan left on channel 2.
Hi sweetbeats, yes that is correct. I did not however test with a mic, just the line in. I tested all 8 channel line ins in fact. I am able to route any line in to any track. It records the input to channel 3 and I can hear it from channel 3 tape out, just not from the main outputs.
Hello everyone this is my first post!
I inherited a Tascam 388 and it has a problem on Channel 3.
I am able to record to all eight channels and I can get output from the tape out on channel 3 but there is no activity on the meter and no output from the main bus. There is also no activity...