
famous beagle
Well-known member
Didn't really know where to put this thread.
I was wondering what percentage people thought this would break down into.
On the one side, you have gear. This includes everything from instruments (guitars, amps, etc.) to outboard compressors, EQs, etc. to interfaces to plug-ins/tape machines, consoles, and even acoustic treatment and monitors .... whatever. Basically anything that can be added to (or removed from) a system at any time, provided you have the money.
On the other side, you have experience. This is simply everything that an engineer/producer brings with him inside his head (or her head).
If you had to break it down into those two categories only, what percentage do you think each contributes to the final product?
For example, I know that, without a doubt, a pro engineer with decades of experience could get a much better sounding recording from my setup and gear than I could at this point. But I wonder how much better? I have a pretty humble setup including (have a few analog recorders too, but I'll just list digital here):
Yamaha NS10s
Reaper and various plug-ins (some free and a few affordable ones)
M-Audio Delta 1010LT 8 in/out interface
A few outboard delays from the 80s (Roland and Fostex)
DBX 166 stereo compressor
(2) DOD R-825 compressors
80s Tascam M-216 mixer
Few decent pairs of headphones
Mics:
Studio Projects C1 LDC
(2) Oktava MC012 SDC
Some 58s
Some 57s
That's the gist in the studio equipment.
I've treated my control room (11 x 14 ft bedroom with hard floors) with absorptive panels at reflective points and bass traps. I have an adjoining "live room" that's a converted den with wood floors. It's about 12 x 20 ft with 8 foot ceilings and has been treated with bass traps, some diffusers, and some absorptive panels on the ceiling.
Regarding instruments, I've got decent enough stuff (nice tube amps and guitars, nice drum kit, etc.)
So ... having that and only that at their disposal, could a pro engineer come in and create a full-professional-sounding recording that would impress not only the general public, but other recordists/musicians as well? In other words, would it be good enough to stand on its own, or would it need the disclaimer "really good for what he had to work with" or something?
Curious to hear what y'all think.
Thanks!
I was wondering what percentage people thought this would break down into.
On the one side, you have gear. This includes everything from instruments (guitars, amps, etc.) to outboard compressors, EQs, etc. to interfaces to plug-ins/tape machines, consoles, and even acoustic treatment and monitors .... whatever. Basically anything that can be added to (or removed from) a system at any time, provided you have the money.
On the other side, you have experience. This is simply everything that an engineer/producer brings with him inside his head (or her head).
If you had to break it down into those two categories only, what percentage do you think each contributes to the final product?
For example, I know that, without a doubt, a pro engineer with decades of experience could get a much better sounding recording from my setup and gear than I could at this point. But I wonder how much better? I have a pretty humble setup including (have a few analog recorders too, but I'll just list digital here):
Yamaha NS10s
Reaper and various plug-ins (some free and a few affordable ones)
M-Audio Delta 1010LT 8 in/out interface
A few outboard delays from the 80s (Roland and Fostex)
DBX 166 stereo compressor
(2) DOD R-825 compressors
80s Tascam M-216 mixer
Few decent pairs of headphones
Mics:
Studio Projects C1 LDC
(2) Oktava MC012 SDC
Some 58s
Some 57s
That's the gist in the studio equipment.
I've treated my control room (11 x 14 ft bedroom with hard floors) with absorptive panels at reflective points and bass traps. I have an adjoining "live room" that's a converted den with wood floors. It's about 12 x 20 ft with 8 foot ceilings and has been treated with bass traps, some diffusers, and some absorptive panels on the ceiling.
Regarding instruments, I've got decent enough stuff (nice tube amps and guitars, nice drum kit, etc.)
So ... having that and only that at their disposal, could a pro engineer come in and create a full-professional-sounding recording that would impress not only the general public, but other recordists/musicians as well? In other words, would it be good enough to stand on its own, or would it need the disclaimer "really good for what he had to work with" or something?
Curious to hear what y'all think.
Thanks!