Hey everyone! I recently was able to pick up a Tascam 388 for a fairly good price in reasonable good condition. I went through and installed a new belt, cleaned the heads really well, got some new tape, and tested out every channel. Everything is great except for one issue.
Channel 1 won't erase correctly - or at all. I can record a test track, return to zero and try to record over it, and I basically end up with an overdub. I tested this out on every other channel and they all seem to be working fine. The heads seem to be in good condition.
I've done a good bit of digging around online and this is one issue that I can't really find much info on. Could reseating the cards be a potential fix? Any help or suggestions at all would be much appreciated!
Channel 1 won't erase correctly - or at all. I can record a test track, return to zero and try to record over it, and I basically end up with an overdub. I tested this out on every other channel and they all seem to be working fine. The heads seem to be in good condition.
I've done a good bit of digging around online and this is one issue that I can't really find much info on. Could reseating the cards be a potential fix? Any help or suggestions at all would be much appreciated!