Search results

Just wondering how to export a single midi track from project view in SX3 after editing. One of my clients brings in a midi file, which I import into Cubase. This gets brought in as all sepertate tracks, which is really nice. I can't figure out how to take just one of those tracks and export it...

Has anyone used digital ear....the wav to midi converter? Just wondering how good of a job it does converting wav to midi

If I wanted to route an audio track to a vsti channel, how do I convert the audio to midi so that it can be routed to the vsti channel thanks

Are there any loops that can be imported into SX3 that automatically adjust to the tempo of the midi files. In Adobe audition, I can , for example , import a drum loop into the midi project, and drag it to make it the same length of the song. If the loop is 2 measures, these 2 measures will...

In my studio, I have 4 seperate quarter inch, balanced ( stereo), tie lines running parallel throughout all rooms. These work great for sending headphone monitor mixes etc. Each room has a 4 input panel ( 1/4 inch balanced ) and all rooms are tied together in parallel. When I plug a guitar into...

In my studio, I have 4 seperate quarter inch, balanced ( stereo), tie lines running parallel throughout all rooms. These work great for sending headphone monitor mixes etc. Each room has a 4 input panel ( 1/4 inch balanced ) and all rooms are tied together in parallel. When I plug a guitar into...

I have been having a problem which has me baffled and wonder if anyone can help. I am doing midi mixed with audio and here is the situation. I bring in the midi file(s), then I import the audio file(s). I then automate the mix and everything seems fine. At this point, I run the audio and midi...

I have been having a problem when I save a project that combines audio and midi. When I first import the midi and audio tracks, everything is correct. After editing and mixing the audio and midi together, I will save under a different name. For example mix 001 then mix 002 etc etc. At a...

I am using a Mackie 8 bus with a RME hammerfall DSP 9652 sound card. The inputs and outputs that go into the sound card are unbalanced , but can be run at +4 or -10...I can send and receive either +4 or -10 from the Mackie 8 bus mixer. Would it be best to run at -10 or +4 ? thanks Dr Shock

Are the 16 bit AD converters known to be noisy? I am using my blackface ADAT's as a way to receive audio out of my PC card ( Hammerfall 9652 ) through lightpipe and then from the ADAT into my Mackie 8 bus with the ELCO +4 balanced signal. I am hearing a lot of line noise and wondering if these...

Any help would be appreciated.....Here is my setup Mackie 8 bus into 24 bit RME (HDSP 9652 ) AD converters at +4 into PC (2.2gig 512 ram 2 internal hard drives 7200 each) Out of RME card ( lightpipe ) to blackface ADAT ( 16 bit ), back to Mackie at +4 using Elco connection using Cubase SX3...

I have read all posts on gapping....tweaked XP forever....have used Ulysses and double dawg to reduce PCI bus latency and still get intermittent gaps while recording...never on playback . They are always of about the same length .087 milliseconds. They occur randomly sometimes every 3-5 minutes...

I have been getting ocassional dropouts while recording. Is it essential to have 2 internal hard drives, one for programs and one for sending my temporary recording files. I have an external drive hooked up to a USB2 port where I am sending the temporary files , and think that the dropouts mwy...

My RME soundcard is sharing an IRQ ( 16 ) with my graphics card. I am getting short dropouts every few minutes or so when I track and am wondering if the IRQ sharing may be responsible. If anyone knows how to change the IRQ assignments in Windows XP home edition, I would appreciate it thanks

When I try to rip audio from a CD CEP does not show my CD rom in the device menu. It may be a problem with XP. not sure. I installed a Hammerfall 96/52 soundcard, and this in turn disabled the onboard soundcard. From that point on, windows mixer, volume control etc. are not available. I can...

I was involved in a mastering session with a reputable engineer whom I have worked with on many occasions He is a 20 year pro and has done a lot of good work. The tracks involved were 2 electric guitars, blues harp and vocals. Nice bluesy kind of material. We used Pro Tools with all the plug...

Does anyone know if this had a headphone out , and if it is good enough quality to use as a control room monitor thanks

Here is my gear Mackie 8-bus 2 Black Face ADAT's with Elco Hammerfall DSP9652 card What would be the best way, if any, for me to record more than 8 simultaneous tracks in my PC, and monitor the signal being recorded Any help would be appreciated

Does anyone know if it is possible to mix the seperate midi channels after inserting a midi file. I know that I can solo one at a time , but was wondering what the best way was to be able to choose as many or little of the midi tracks for monitoring in CEP

I am not sure how to utilze the clipboards in CEP Can I view them and paste as I would from a Windows clipboard One other thing, is there anyway to control the mix of instruments from a midi file within CEP software Thanks