Hi guys,
I finally setup my studio again, after 6 years hiatus. So things are rusty
So I have a DM3200, Cubase and Virus
I'm wanting to route the Ti USB outputs through the DM. ( pics below)
I'm wondering how people have done this.
I'm not quite sure on the input selection on the DM.
I have a TDIF on slot2 (which is used by my AKAI Z8), and have tried all slot 1 (1-32) settings (routing to input 9&10)
The TI is set to 3 ins/0 outs and midi channel 1 is set to USB1L&R, and VST connections routed to Device port 9&10
I don't know what I'm missing with the routing.
Ultimately, I want to route and monitor the following:
TI Midi #1 -> USB1L&R -> DM In 9&10
TI Midi #2 -> USB2L&R -> DM In 11&12
TI Midi #3 -> USB3L&R -> DM In 13&14
I finally setup my studio again, after 6 years hiatus. So things are rusty
So I have a DM3200, Cubase and Virus
I'm wanting to route the Ti USB outputs through the DM. ( pics below)
I'm wondering how people have done this.
I'm not quite sure on the input selection on the DM.
I have a TDIF on slot2 (which is used by my AKAI Z8), and have tried all slot 1 (1-32) settings (routing to input 9&10)
The TI is set to 3 ins/0 outs and midi channel 1 is set to USB1L&R, and VST connections routed to Device port 9&10
I don't know what I'm missing with the routing.
Ultimately, I want to route and monitor the following:
TI Midi #1 -> USB1L&R -> DM In 9&10
TI Midi #2 -> USB2L&R -> DM In 11&12
TI Midi #3 -> USB3L&R -> DM In 13&14