T
TheArchitect
New member
So i read a lot of forums trying to figure out how to make the sound better but i figured id post to get a opinion for mine personally.
Heres a track i recorded and mixed (the beat was a premade one from youtube):
soundcloud.com/chrisisdope/ill-noyz-she-down<<<<<<<<<<<<<<<<
It sounds good to me but it doesnt have that professional polished sound
Heres what i did for each track
Main Vocals:
Waves C1 Compressor (Ratio - 3:1 TH - 22Db ATK 1.8ms RLS - 200MS)
EQed to take out the low endand raise the top arouns 7500Hz and 600Hz
Desser
Gate
2% reverb
Background vocals:
Waves C1 Compressor (Ratio - 3:1 TH - 22Db ATK 1.8ms RLS - 200MS)
EQed out the low end and raise around 7500Hz
Desser
Main chorus:
Waves C1 Compressor (Ratio - 3:1 TH - 22Db ATK 2.0ms RLS - 200MS)
EQed to take out the low endand raise the top arouns 7500Hz and 600Hz
Desser
Delay
FLS Compressor (Ratio - 3:1 TH - 26.2Db ATK 4.7ms RLS - 200MS)
Routed to Bus 7
Chorus Layer:
Waves C1 Compressor (Ratio - 5:1 TH - 30Db ATK 1.57ms RLS - 164MS)
Eqed out low end and slightly droped the high end around 10500Hz
Added delay
Routed to Bus 7
Bus 7 (choruses):
Added a automated delay
Waves C6 Compressor
120 Hz down - Nothing
120HZ -2600Hz - Ratio - 3:1 TH - 29.4Db ATK 4.6ms RLS - 170MS
2600Hz - 10900Hz - Ratio - 3.6:1 TH - 38.2Db ATK 2ms RLS - 185MS Gain - 3.6Db
10900HZ up - 7.8:1 TH - 52Db ATK 0.50ms RLS - 1650S Gain - 5Db
Master track -
Used Izotope ozone to get it to a good level (Threshold - 8.8Db) without cutting the peaks and put a margin of -0.1db
Sorry if thats too much info but can i get some tips on what i couldve done better and how to improve.
Heres a track i recorded and mixed (the beat was a premade one from youtube):
soundcloud.com/chrisisdope/ill-noyz-she-down<<<<<<<<<<<<<<<<
It sounds good to me but it doesnt have that professional polished sound
Heres what i did for each track
Main Vocals:
Waves C1 Compressor (Ratio - 3:1 TH - 22Db ATK 1.8ms RLS - 200MS)
EQed to take out the low endand raise the top arouns 7500Hz and 600Hz
Desser
Gate
2% reverb
Background vocals:
Waves C1 Compressor (Ratio - 3:1 TH - 22Db ATK 1.8ms RLS - 200MS)
EQed out the low end and raise around 7500Hz
Desser
Main chorus:
Waves C1 Compressor (Ratio - 3:1 TH - 22Db ATK 2.0ms RLS - 200MS)
EQed to take out the low endand raise the top arouns 7500Hz and 600Hz
Desser
Delay
FLS Compressor (Ratio - 3:1 TH - 26.2Db ATK 4.7ms RLS - 200MS)
Routed to Bus 7
Chorus Layer:
Waves C1 Compressor (Ratio - 5:1 TH - 30Db ATK 1.57ms RLS - 164MS)
Eqed out low end and slightly droped the high end around 10500Hz
Added delay
Routed to Bus 7
Bus 7 (choruses):
Added a automated delay
Waves C6 Compressor
120 Hz down - Nothing
120HZ -2600Hz - Ratio - 3:1 TH - 29.4Db ATK 4.6ms RLS - 170MS
2600Hz - 10900Hz - Ratio - 3.6:1 TH - 38.2Db ATK 2ms RLS - 185MS Gain - 3.6Db
10900HZ up - 7.8:1 TH - 52Db ATK 0.50ms RLS - 1650S Gain - 5Db
Master track -
Used Izotope ozone to get it to a good level (Threshold - 8.8Db) without cutting the peaks and put a margin of -0.1db
Sorry if thats too much info but can i get some tips on what i couldve done better and how to improve.
