VS8F-1 effects with VS880

[Brennan666]

is there any way to run more than 2 effects over a whole song? like reverb and U-87 mic sim over track1, compression and mic sim over track2, and limmiting and reverb over track3? i opened my machine up last night to try to figure out if the 1/4" imputs are balanced or not (anyone know?) and ended up finding the effects card in there. it turns out that the former owner of it put the card in but didnt put it in all the way, so with a little bit of wiggling i now have the card....but i dont have a manual for it

 

[formerlyfzfile]

Bouncing is the way.

You can only do 2 att once so you have to, for your examples, bounce track 1 through U87 MIC SIM and REVERB to another track.
Then bounce Track2 through MIC SIM and COMPRESSOIN to another track.
Then bounce track 3 through LIMITER and REVERB to another track.

Mix down from there.

I like to flip to opposite ends for bouncing. So if I'm bouncing Track 1.1 (Tack 1, Virtual track 1) then I send it to 8.8 (track 8, virtuall track 8).

Now remember, if you are using 2 effects in series then Eff2 will come before Eff 1 in the chain ...... so for track 1, Eff2 will be the U87 MIC SIM and Eff1 will be REVERB ....assuming you want the mic going into the reverb.

Also once you change effects and settings you have to manually go back so 1) write everything down and 2)save each set in a Scene.

Scene settings will save both the patch and perameter settings for the effects.

Check out

http://www.vsplanet.com/ubb/ultimatebb.php
http://www.soundecision.ca/VS880EX/
http://www.ps139.com/vs880ex/

-mike

 

[Brennan666]

thanks man! i appreciate it