Tascam smpte problem

  • Thread starter Thread starter yawnjones
  • Start date Start date
Y

yawnjones

New member
I thank you all for the motivation!!!

This is a Powerful community here!!

I will definitely post music

Here's what Im using

Cakewalk Sonar
Motu Micro express with SMPTE MTC
Tascam 388 ( of course)


The goal: I Just want to get my sequencer (Cakewalk Sonar) to start when I press play on the Tascam 388

I would like to use my external keyboards through Cakewalk Sonar using MIDI.

I was trying to setup smpte using my MOTU micro express unit

the signal from the smpte (stripe) works

i recorded the tone on track 8 ( DBX OFF) through my Motu device

I played back the reel back .... the tone is there!!!

I put the audio 1/4 jack into Smpte (IN) from back of track 8 (tape out)


The Motu device (micro express) will not pick up a signal from track 8

I even checked the cords to hear a signal ....audio signal works

Any help would be greatly appreciated

im open to alternate suggestions as well

thanx in advance
YJ
 
Back
Top