sloom
New member
8x4x2 mixer with a comprehensive set of RCA/XLR connections around back of the unit.
Channel connections:
-Channel Send/Rec
-Tape in/Line in
-Direct out/Cue out
-XLR Mic in
Channels 1-6 are XLR connectors, 7 and 8 are 1/4 TRS
There are also Buss Aux and Line outs, and 2 ea Phono in/outs... Submix I/O...
Great sound, especially if you prefer the older vibe- I'd been using it as a front-end for my digital recording set-up at home, and it sweetened up the tracks quite nicely. A new I/O section was installed at the back of the unit by Public Sound in Providence (Tascam authorized service ctr) last summer, and it has seen almost no use since then. It is a very nice, smoothly functioning piece of gear. There's one missing fader knob, and some marks from a previous owner. Also there's a bit of the trim missing at the bottom of the unit- this is cosmetic only. $250 sweeps 'er up.
Thanks for looking.
Channel connections:
-Channel Send/Rec
-Tape in/Line in
-Direct out/Cue out
-XLR Mic in
Channels 1-6 are XLR connectors, 7 and 8 are 1/4 TRS
There are also Buss Aux and Line outs, and 2 ea Phono in/outs... Submix I/O...
Great sound, especially if you prefer the older vibe- I'd been using it as a front-end for my digital recording set-up at home, and it sweetened up the tracks quite nicely. A new I/O section was installed at the back of the unit by Public Sound in Providence (Tascam authorized service ctr) last summer, and it has seen almost no use since then. It is a very nice, smoothly functioning piece of gear. There's one missing fader knob, and some marks from a previous owner. Also there's a bit of the trim missing at the bottom of the unit- this is cosmetic only. $250 sweeps 'er up.
Thanks for looking.
Last edited: