novation A station arpeggiator

  • Thread starter Thread starter dub
  • Start date Start date
D

dub

New member
Hi guys,
I bought the novation A station rack version, it works ok, but I can't use his arpeggiator, is there something particular? I follow the instructions on the manual but I can't hear any arpeggiator.
I play the notes on my keys and nothing heard, what could it be??

Thank you
cheers
Marco.

http://web.tiscali.it/mindseye
 
ok... here the deal... you probably have your sync reference set to external, which means that your box is waiting for a midi sync reference to establish a tempo orientation... if you wanna play the fukkah live, you then need to set it's sync reference to internal and then adjust the tempo to your needs... i have come around this by having my sequencer open and playing my keyboard through my sequencer after having it started a few seconds to give the a-station a reference...
so either set your sync reference to internal or use a sequencer to give it a reference (it will keep this and you can then stop your sequencer again...)
if i had the box right next to me i could tell you exactely what to do, cause you also need to change a few parameters in the arpeggiator menu, but, alas, i don´t.. i know you´ll have to put it on restart on keypress and i can´t remember whether latch have to be on or off... hope that helped anyhow...
 
with novation it's always something extremely simple that's wrong... first off i suggest you check the troubleshooting advice in the back of your manual... i'll go home and check out the options from my side and while you're at it, send an e-mail to the staff at www.novationuk.com explaining the problem...
 
Hi Chriss,
thanks for your attention.
I can't find any troubleshooting section in the back of my manual, and I have some problems to contact novation cause they use formmail and I can't install it on my computer.

Anyway if you have any suggestion it's welcome.
Thanks again
cheers
Marco

http://web.tiscali.it/mindseye
 
Back
Top