R
rmurdo
New member
Hi all!! Two questions here.
I have a Yamaha MW10 mixer and a JK Audio broadcast host (phone line interface).
Ok, I have mic 1 going to a mic that I talk with. I have mic 2 coming from the phone interface (caller audio to mic 2 on mixer). I then have a port on my phone interface that I need to get my audio to. Right now I have that plugged in AUX 2 on the mixer.
Problem one, when the caller speaks, it goes back in to the mixer and is sent to the phone interface again. If I turn up caller volume, they get feed back. How do I make it so that I send only channel 1 to that box?
2. I get what sounds like an airplane humm in the backround. Might also be a byproduct of how its running.
Any ideas?
Thanks for reading.
Rob
I have a Yamaha MW10 mixer and a JK Audio broadcast host (phone line interface).
Ok, I have mic 1 going to a mic that I talk with. I have mic 2 coming from the phone interface (caller audio to mic 2 on mixer). I then have a port on my phone interface that I need to get my audio to. Right now I have that plugged in AUX 2 on the mixer.
Problem one, when the caller speaks, it goes back in to the mixer and is sent to the phone interface again. If I turn up caller volume, they get feed back. How do I make it so that I send only channel 1 to that box?
2. I get what sounds like an airplane humm in the backround. Might also be a byproduct of how its running.
Any ideas?
Thanks for reading.
Rob
