mixing with EAW's

[yhobay]

Hello, I have a question about mixing my system for live performance. I have a Midas 160 board with EAW LA325 mains LA400 subwoofers, and LA212 stage monitors. I run All instruments into the board . My problem is with the stage monitors . Some want to hear only themselves or themselves and maybe one other on their monitor. Is it possible to limit the monitors like this or am I stuck with the entire sound coming out of each monitor? I have a total of 4 LA325s 8 LA400 4 LA212 stage monitors driven by 2
Crest CA18’s 4 Crest CA12’s . Will I need a larger mixer to accomplish this or can I do it with the 160?

 

[fldrummer]

Shouldnt you run the stage mons from the AUX's from the console? Then they will each have their own mix. How many aux's are their and what are you using fthem for now at foh?

 

[Light]

You can easily do up to four monitor mixes. You have the two "mon" sends, and then you switch the two "aux" sends to pre fader, and you have two more mixes. The other two sends, labeled "fx" are post fader, so they are not very usful for monitor sends, as they would change anytime the FOH mix changed.

Good system for a small room though.


Light

"Cowards can never be moral."
M.K. Gandhi

 

[yhobay]

Thankyou -- Never thought of that-- Its a good thing there are those like you to help those like me.