Mixer to soundcard problem

[DCs_F1nest]

Soundcard: Audigy and it has these plugs - Digital out, Line in (analog), Mic in (analog), Front out (analog), rear out (analog)

Mixer Phonic MM122 Mixing console

Ok, i been in the manual lookin how to setup for recording, but i still have no clue to pluggin it in my soundcard. I tried pluggin the rca left and right into the Tape In and then and the other end of the left and right to 1/8 attachments into the front and rear outs. then i plug my speakers (u know computer speakers with the subwoofer thing) into the phones part of the mixer........i play music from realplayer and there is a loud buzzing sound. then i plug my microphone into the mic input on the mixer, then the other set of rca cables from Tape out then i use only the left or the right to a 1/8 into the line in....i record in cool edit no sound..... i switch to mic in, buzzing, but buzzing commin out of speakers also so no luck........ i just contacted the website of company for their assistance but if anyone can get at this quicker just drop ya comments to where as things go

here's a picture of the mixer I have
http://www.tech-mate.co.uk/Images/images/phonic/mm122-02big.jpg

 

[tdukex]

If your speakers are powered, they will plug into the Audigy's speaker jacks. If they are not powered, you will go from the Audigy's stereo line out into one of your mixer's stereo line inserts. Then go out from your mixer's tape out into an amplifer and plug your speakers into the amp. Now you can hear your music through speakers or use the headphone jack on the mixer.

To get sound from your mixer to the Audigy (for recording), go from your mixer's L/R main outs to to the Audigy's stereo line in (you will need a Y-adapter from two RCAs to one stereo 1/8" plug if you have the Audigy without the breakout box.

Do not plug your speakers into the headphone jack (or any other jack that is not a speaker jack).

Do not use the mic in on the Audigy for anything.