P
poul
New member
hey,
i use cool edit pro 1.2a and a 16channel behringer mixer to record 8 tracks, i have a sek'd ARC88 8 i/o soundcard, at the same time.
so,
instrument -> line in -> direct out -> soundcard -> cool edit -> soundcard -> tape return -> monitor
but when i mix it, the signal from my computer to the tape returns (monitor channels) also goes back via the direct outs which causes feedback.
so now i record on the channels 1 to 8, and mix from 9 to 16. it schould be possible that there is a function somewhere in cool edit that switches the incoming signals off during mixing. but i cant find it...
and now i havent got any channels left, or i have to unplug cabels en puss switches all the time...
can anybody help me?
thanks,
poul
i use cool edit pro 1.2a and a 16channel behringer mixer to record 8 tracks, i have a sek'd ARC88 8 i/o soundcard, at the same time.
so,
instrument -> line in -> direct out -> soundcard -> cool edit -> soundcard -> tape return -> monitor
but when i mix it, the signal from my computer to the tape returns (monitor channels) also goes back via the direct outs which causes feedback.
so now i record on the channels 1 to 8, and mix from 9 to 16. it schould be possible that there is a function somewhere in cool edit that switches the incoming signals off during mixing. but i cant find it...
and now i havent got any channels left, or i have to unplug cabels en puss switches all the time...
can anybody help me?
thanks,
poul