Mastering a DP-004

  • Thread starter Thread starter flatlander88
  • Start date Start date
You did everything right>>> set the out point again>>> press the record mode button>>> turn the wheel to Master record>>> Press F4>>> Put on head phones>>> Press the record and PlayBack>>> key to start the master recording
 
It will automaticly stop at the end of recording the master>>> Press the record mode key to open the recorder mode screen>>> turn thr data wheel to master play>>> Press F4 and then the play back button>>>

I have a DP-008 and a 488 MarkII and a DP24SD
 
Windshear I mean to tell you I tried that three times and it every time went from 2h09m31s to 00-00-00 I cant start the Master Rec at the further in point It wants to Master the whole card ending at 2h14m40s
 
Is the fact true that I cannot master songs that are not "saved" if they are recorded further onto the partition such as the one we tried (2h09m31s)
 
I have to apologize I just cannot understand how to master and then upload songs recorded later into the memory card
 
It's not setting the end point for some reason>>> Press the in/out key>>> open the i/o screen>>> play the song back and press F4 where you want the song to end>>> Then try to master again
 
Well I think I am setting the end point correctly but the start just will not register it moves every time back to zero- the start of the card's partition anyway i have to get some sleep this problem is past my paygrade
 
Last edited:
Thank you immensely for trying to straighten the matter out maybe the Tascam office can undertake it Goodnight and well ness
 
I think you can set the "in" position on that I/O screen also>>> that may be the cure
 
You must log in or register to reply here.
Back
Top