M-Audio 1814: Cubase SE not seeing all inputs.

[quietb03]

Hey I just got Cubase SE to go with my M-Audio 1814. The problem I am having is that under the VST connections window it doesnt show anything. I tried to add the busses manually but it only lets me add up to 4 mono busses when I should be able to add 8 inputs since thats what the 1814 has. Anyone know how to fix this issue so that I can track out my beats individually from my hardware?

 

[pikingrin]

Your interface should have a control panel somewhere on your computer where you can go to adjust buffer size, etc. I don't know for sure since I have never owned or used the unit you're talking about, but there might be a mixer on your control panel where you can activate different inputs for recording use. Check into that, it may be the issue. Good luck!

 

[guttapercha]

Hey I just got Cubase SE to go with my M-Audio 1814. The problem I am having is that under the VST connections window it doesnt show anything. I tried to add the busses manually but it only lets me add up to 4 mono busses when I should be able to add 8 inputs since thats what the 1814 has. Anyone know how to fix this issue so that I can track out my beats individually from my hardware?

So it doesn't even show two inputs? If not, are you sure that Cubase is "seeing" your 1814 at all?

 

[quietb03]

It does see the 1814 because under the VST Connections it says M-Audio 1814 Stereo Out. I don't have this problem at all when using pro tools.

This pic is for a different issue...when I dont even have any project loaded up the marker jumps all over the place and its acting like it sees a signal. The play and stop buttons keep flashing.
https://i144.photobucket.com/albums/r196/quietb07/weird.jpg


here u see i only have 4 mono ins for some reason
https://i144.photobucket.com/albums/r196/quietb07/noins.jpg

https://i144.photobucket.com/albums/r196/quietb07/5.jpg

https://i144.photobucket.com/albums/r196/quietb07/4.jpg

https://i144.photobucket.com/albums/r196/quietb07/3.jpg

https://i144.photobucket.com/albums/r196/quietb07/1.jpg

 

[brzilian]

Sounds like you didn't install the SE 3 update:

http://steinberg.net/544_1.html

This update remedies the input/output port limitation to the first eight I/Os of the audio interface. Now, it is possible to access all ports of the interface and assign them to the four buses of Cubase SE 3.0.3. ​

 

[quietb03]

Sounds like you didn't install the SE 3 update:

http://steinberg.net/544_1.html

This update remedies the input/output port limitation to the first eight I/Os of the audio interface. Now, it is possible to access all ports of the interface and assign them to the four buses of Cubase SE 3.0.3. ​

Thanks alot. One more question. I do have a Presonus Digimax FS also connected to my M-Audio 1814 by adat. Is there any way to have the Cubase bus also see my ADAT inputs? Or is Cubase SE too limited for that?