X
xtremedb
New member
Here's a quick list... if you see anything you want, send me an email at brad@just-for-musicians.com.
Lexicon MPX-G2 with Lexicon floor-controller... $1,000
Yamaha VL70-m acoustic modeling synth... $325 SOLD
Yamaha WX5 Wind Controller... $300 SOLD
(These two are VERY cool together)
Soundcraft Spirit Studio 8 buss, 6 aux, 4 band EQ
Awesome console, but heavy to ship (It's a real big-boy)... $850
Behringer Ultracurve digital EQ and calibrated test mic... $350
Line 6 2/12 combo (the original) with floorboard and cover. Nice amp, can be upgraded with chip from Line 6, although I prefer the original. I also have some custom sounds stored in it that we modeled in the studio off a Mesa DC3, a Boogie, and a vintage Super Lead... I'll leave them in memory... $575
(3) Peavey 31 band graphic eq... $75 ea.
Rane 31 band graphic eq... $76
Behringer Autocomm compressor (the 1st model)... $75
Alesis 3630 compressor... $70
Digitech Studio Quad processor... $250
dbx 266 compressor... $80
Audio Logic 4 Channel gate... $75
Peavey XG5 5 channel gate... $65
Audix D4 kick drum/bass mic... $100
AKG d112 with case and swivel-clip... $140
Yamaha REV100... $80
Peavy 8.5 amplifier... $200
Peavey monitor system 3 wedges (15"/horn) and 1 drum fill (15" and horn) $400 for all or $125 ea. Would be heavy to ship all of them, or you could pick up if you live anywhere near New Orleans/Baton Rouge.
American DJ light system: (3) 4 Channel dimmer packs (older analog style), (1) 12 Ch controller, connecting cables... A few of the bump buttons are broke, a few fuses missing, it'll take a little work, but you can have a light show real cheap... just please take it off my hands... $100
Mackie 24/4 mixer with SBC flight case... this is the ONLY piece of equipment I am listing that was at the show I mentioned. Give it a thorough cleaning, maybe replace one or two components and you'll probably have a good as new board. It was in perfect condition working monitor duty prior to this incident. Bring it in to your local shop or do it yourself. Either way, you'll probably end up with a working Mackie 2404 and flight case for... $350 (Hell, I think I payed nearly half that for just the flight case).
Lexicon MPX-G2 with Lexicon floor-controller... $1,000
Yamaha VL70-m acoustic modeling synth... $325 SOLD
Yamaha WX5 Wind Controller... $300 SOLD
(These two are VERY cool together)
Soundcraft Spirit Studio 8 buss, 6 aux, 4 band EQ
Awesome console, but heavy to ship (It's a real big-boy)... $850
Behringer Ultracurve digital EQ and calibrated test mic... $350
Line 6 2/12 combo (the original) with floorboard and cover. Nice amp, can be upgraded with chip from Line 6, although I prefer the original. I also have some custom sounds stored in it that we modeled in the studio off a Mesa DC3, a Boogie, and a vintage Super Lead... I'll leave them in memory... $575
(3) Peavey 31 band graphic eq... $75 ea.
Rane 31 band graphic eq... $76
Behringer Autocomm compressor (the 1st model)... $75
Alesis 3630 compressor... $70
Digitech Studio Quad processor... $250
dbx 266 compressor... $80
Audio Logic 4 Channel gate... $75
Peavey XG5 5 channel gate... $65
Audix D4 kick drum/bass mic... $100
AKG d112 with case and swivel-clip... $140
Yamaha REV100... $80
Peavy 8.5 amplifier... $200
Peavey monitor system 3 wedges (15"/horn) and 1 drum fill (15" and horn) $400 for all or $125 ea. Would be heavy to ship all of them, or you could pick up if you live anywhere near New Orleans/Baton Rouge.
American DJ light system: (3) 4 Channel dimmer packs (older analog style), (1) 12 Ch controller, connecting cables... A few of the bump buttons are broke, a few fuses missing, it'll take a little work, but you can have a light show real cheap... just please take it off my hands... $100
Mackie 24/4 mixer with SBC flight case... this is the ONLY piece of equipment I am listing that was at the show I mentioned. Give it a thorough cleaning, maybe replace one or two components and you'll probably have a good as new board. It was in perfect condition working monitor duty prior to this incident. Bring it in to your local shop or do it yourself. Either way, you'll probably end up with a working Mackie 2404 and flight case for... $350 (Hell, I think I payed nearly half that for just the flight case).