
VomitHatSteve
Hat STYLE. Not contents.
I have a hardware conundrum here. I've got a Tascam FW-1804 that I've been using for a few years. In the last few months, it started having a problem where it seemed like it needed to "warm up" before it would talk to my computer.
So with my old computer, I would turn them both on at the same time, and then 10 minutes later when the PC finished booting, I'd power cycle the Tascam, and it would work fine.
However, since upgrading the computer this week, the problem seems to have gotten worse (or at least more noticeable). This morning it took me half an hour before the interface was willing to consistently talk to reaper. After 10 minutes or so, it would connect, but it stuttered really badly and was basically worthless.
Any idea what could cause this and how to fix it?
Thanks!
So with my old computer, I would turn them both on at the same time, and then 10 minutes later when the PC finished booting, I'd power cycle the Tascam, and it would work fine.
However, since upgrading the computer this week, the problem seems to have gotten worse (or at least more noticeable). This morning it took me half an hour before the interface was willing to consistently talk to reaper. After 10 minutes or so, it would connect, but it stuttered really badly and was basically worthless.
Any idea what could cause this and how to fix it?
Thanks!