Everything was goin great....and then.....

[clevodrummer]

I ran into a problem with my Tascam 424MKIII and Behringer small eurorack.
I recorded tracks 1 and 2 for bass and geetar. Than I ran my drums into the mixer and ran it to track 3 and 4. I also ran the mixer into the Tascam sub input. The signal is hot as hell, and I cant figure out why the Tascam is maxin the meters from the mixer.

No matter what I do, turnin down the mixer main mix, etc., the signal stays way up there on the MKIII.

any suggestions?

 

[gummblefish]

possibly your gain is too high on the tascam. Is there a swith for line level signals, mic and guitar/bass signals? if so it will probably be that.

 

[NYMorningstar]

Use the tape out from the mixer instead of the main outs and go into a line in on the tascam.