e609 and phantom power

[revamp]

ok i know i can rely on you guys. so please give me a straight answer on this. will the phantom power break the e609 and is it possible to plug the e609 and SP B1 together into my DMP3. the reason i'm asking is the SP B1 requires phantom power while the e609 does not.

 

[paddyponchero]

If you have a proper balanced cable I shouldn't think there'd be any problem, see here:
http://www.sounddevices.com/tech/phantom.htm

'Because phantom voltage is exactly the same on pin-2 and pin-3 with respect to pin-1, phantom power has no effect on balanced, dynamic microphones. A properly connected balanced, dynamic microphone will operate with or without phantom present. With ribbon microphones turning phantom power off is recommended.'

 

[revamp]

thank you thank you