E
el.dizzee
New member
Hi guys, so while I'm not quite a COMPLETE noob when it comes to home recording (I've been dabbling here and there for a while), I'm just pursuing this as a hobby because I like to write and record music, mine and that of friends. I'm really keen on learning how to improve on my recording skills, and I've decided to take an arguably small but definitive leap into upgrading my current setup in order to do so.
That being said, here is my current setup: I'm mostly using Cubase 5 LE as my DAW of choice, but I've also been messing around with Logic Pro on my friend's macbook. To record guitar and vocals I connect directly into an M-Audio Firewire Solo interface, using an M-Audio Nova condenser for the vocals and acoustic guitar. I'm well aware of the general stance on m-audio products, these were basically impulse buys a few years back when I decided "hey, let's try to record stuff, that'd be neat". For the time they were more than good enough to accomplish what I was going for.
Now I'm looking to improve the quality of my recordings and start to really learn how to properly mix my tracks, so I want to figure out the best/most efficient/'most bang for my buck' way to improve the quality of the input audio.
Which leads me to today -----> At work I stumbled upon a Presonus Firestudio Project for only $300, and it appeals to me because it has more inputs, which will be great for tracking more simultaneous instruments (which I plan to do) and has many more and greater options for input monitoring. What I'm unsure of is whether or not the preamps will be a worthwhile improvement over the firewire solo's.
So that sounds like a bargain to me, but I'm also wondering whether my money would be best spent by buying a preamp along the lines of a Presonus Tubepre, to use in conjunction with the firewire solo to warm up vocals and instrument tones, or perhaps instead replace the mic and/or firewire solo altogether..
I'm quite eager to dive right in but I think I need a push in the right general direction to better understand where I should begin and focus my time and resources!
Any and all advice/suggestions would be greatly appreciated, thanks
Lenny
That being said, here is my current setup: I'm mostly using Cubase 5 LE as my DAW of choice, but I've also been messing around with Logic Pro on my friend's macbook. To record guitar and vocals I connect directly into an M-Audio Firewire Solo interface, using an M-Audio Nova condenser for the vocals and acoustic guitar. I'm well aware of the general stance on m-audio products, these were basically impulse buys a few years back when I decided "hey, let's try to record stuff, that'd be neat". For the time they were more than good enough to accomplish what I was going for.
Now I'm looking to improve the quality of my recordings and start to really learn how to properly mix my tracks, so I want to figure out the best/most efficient/'most bang for my buck' way to improve the quality of the input audio.
Which leads me to today -----> At work I stumbled upon a Presonus Firestudio Project for only $300, and it appeals to me because it has more inputs, which will be great for tracking more simultaneous instruments (which I plan to do) and has many more and greater options for input monitoring. What I'm unsure of is whether or not the preamps will be a worthwhile improvement over the firewire solo's.
So that sounds like a bargain to me, but I'm also wondering whether my money would be best spent by buying a preamp along the lines of a Presonus Tubepre, to use in conjunction with the firewire solo to warm up vocals and instrument tones, or perhaps instead replace the mic and/or firewire solo altogether..
I'm quite eager to dive right in but I think I need a push in the right general direction to better understand where I should begin and focus my time and resources!
Any and all advice/suggestions would be greatly appreciated, thanks

Lenny