miroslav
Cosmic Cowboy
I am building 36 traps for my new rented studio space.
Don't forget to build some stairs from that high doorway.
How come the door is up high like that?
Don't forget to build some stairs from that high doorway.
How come the door is up high like that?
diggy_dude
Now 169% diggier!
Don't forget to build some stairs from that high doorway.
How come the door is up high like that?
It's a pet door for a kangaroo!
JimmyS1969
MOODerator
It's a pet door for a kangaroo!
Awesome!!!!
S
Schecterplayer
New member
I reaaaallly dont have that kind of time to build my own. I wish i could though. These will suit my needs
Capriccio
A#13b5b9
That's a window. I use the door which at the other end of the room. I haven't noticed which the kangaroo uses.
Okay, back to Schecterplayer's topic.
If you have more money than time then purchasing traps is just as good and a quicker way forward. My DIY traps are working out at 12.5 euros (£11, $18) each. 36 are costing me 450 euros (£400, $650). To make them this cheap I have had to buy all the materials in one go so you are probably taking a better route for your situation. How are the two new traps? Have you found where best to locate them?
S
Schecterplayer
New member
Still waiting for arrival
miroslav
Cosmic Cowboy
c7sus
Disenfranchised Member
It's a gateway to a wormhole.
miroslav
Cosmic Cowboy
To where....Ceti Alpha 5?
Re-tox_stl
New member
If you don't have an hour or two to dedicate to a project, then music production really isn't your game (as previously stated).
Drew
c7sus
Disenfranchised Member
S
Schecterplayer
New member
Hahaha oook retard.... U dont know me then.
c7sus
Disenfranchised Member
I was talking to Miro, dummy.
Make yourself useful and go sell some plasma to get more foam.
N
NetWell
New member
NetWell Noise Control has been in the foam business for 20 years. Some ideas. First, there's a difference in foam types. Bedding/packaging foams don't carry the same pores per sq inch that polyurethane foams do that are used in acoustics. Be sure it's not just "any" foam you are targeting. Second, the mid and high frequency sounds are indeed absorbed more than low bass tones, unless you thicken the foam up. By bumping from 2" thick to 3" thick, you triple the effect down at the low bass end. 2" thick panels carry NRC values of .15 at 125 Hz, pretty weak, but 3" thick panels carry NRC values of .44. Overall NRC values of 2" thick panels are NRC valued at .50 while 3" thick panels are NRC valued at 1.00. This is why you see foam in studio settings. Not because it's less costly, but because it does indeed work if the right thickness and quantities are installed. Do not put 1" or 2" thick panels in studio settings, you are throwing money away. Also, cloth wrapped Fiberglass panels are also common in studio settings. There, a 2" thick panel will equal the absorption coefficients of a 3" thick foam panel, but cost more because of the cloth that is used to wrap the panel will. A more expensive product to make, sound values are comparable. Hope this helps!