A little problem..

[MattA]

Hi.
Can I pull the cables from my Behringer ADA8000 outputs to the mixer mic ins? In other words from XLR outputs to the XLR inputs. I`m going to do the monitoring system, and I was wondering can I do so... Any impedance differences?

Thanks, Matt

 

[deepwater]

You can. Not sure why you would do that instead of just pluging into your mixer.

 

[GABritton]

The XLR outs of the ADA8000 aren't fed from the XLR ins. They are only fed from the ADAT in on the back of the unit. I haven't tried this, but I've heard you can run a lightpipe cable from the "out" to the "in" of the ADAT interface on the back of the ADA8000. Besides that, your impendance should be fine.