Search results

does the microphone have 100uf output caps?

I have two of the older TLM1050s. If you have skill and the correct tools you can unsolder the tube from the PCB and not lift the pads or break the tube. I removed the tubes with no problem, PCB pads are in good shape.

One of my "best" LD microphone builds is an external powered solid state one. It took some time to get to the circuit I like. I am also working on another solid state circuit to emulate what tubes add to a microphone build. Fenders 80's? solid state Harvard amp used jfets in a clever tube...

Look at this. http://www.schoepsclassics.de/1953.htm I wonder if that was the inspiration?

The posted 87 curves are for a KH modded one. Not stock Do you know what what was done to the microphone? did KH change/remove the high end EQ?

Looks like it might be ALMOST an older u87 type circuit set to cardioid. Does it have a harsh high end? Leave the basket alone. The transformer might be fine as it is. Study the old Neumman u87 schematic for ideas. The one cap that will make a difference is the one between the two 1gigs...

To be clear I don't like it much with the changed part it is a bit smoother. Gutting it and installing a new circuit makes good sense to me if I was going to keep them.

V69s I have looked inside and started to trace have the tube triodes in parallel, cathode biased, set up as a charge amp with whats looks like about a gain of 1 inverting. The module has two BJTS and a Fet and stuff under an epoxy module and good caps (what circuit has this transistor count?)...

google "AKG c451e schematic" one of the first links has a schematic with some voltages marked. Left side is a source follower into an emitter follower to the output transformer Right side is the regulated 10VDC supply and DC to DC converter for the capsule voltage Power the circuit up from a...

His mod? Some of us have done this kind of stuff years ago and shared. Google 603 mods search at DIY the lab and Zanspark(sp) at yahoo.

I read the link and I would call Shure about what the fix might cost. You might have the same problem caps being bad all the time. One can work on SMD with regular irons and things but you need practice. I would not bake the board. What does the capsule look like?

in the picture the top left large device should be a fet center leg gate, note the nice design of the PCB with the cutouts to isolate the high resistance section of the board. first simple things I looked at shure site it has pictures of the 32 and 44 replacement capsules but not the 27. Can...

Nice but it looks like you are missing a part of its sound. Something important looks like it is missing

Looks like soundelux stuff e250? Ifet? E49? E47?

condensers 1 sounds like a AMI transformer 2 sounds like a brauner VM1 transformer and high end from the capsule in a vm1

early 1050s have soldered in tubes. With the stock transformer you might want to keep the CF part.

Parts look OK. R11, C10 interesting I was told some of the early MXL 2001s came with better caps I have not checked that yet. The transformer bobbin looks different than some china transformers I have seen, note the tabs to help hold the lams together. The lams look more refective and...

maybe the church microphone circuit with that transformer ratio and adjusting the B+

I was having some fun with Marik. However people getting upset is kind of funny. Phil It is not in my interest to tell: However I do leave HINTS, pay attention to the hints think about do some reading and thinking and testing. I have spent to much time learning this stuff, a lot of it on my...

Marik don't give design away for free.