Search results

I have experience with it. I'm not sure I'm following the questions in the second paragraph. It's a mic preamp. You can record anything with it. Acoustic guitar, sure. Personally, I would say it is context-dependent and outcome-dependent regarding whether I'm "slamming it" -- it's more about...

@flyingace I don't really understand. Are you exposing the outputs of the MPA, the inputs, or both via the patchbay? If the inputs, that's interesting since they're mic-level and they pass phantom power.

Oh yeah, people have recorded in all kinds of environments. There's also Elliott Smith who recorded frequently at home. Or Sebadoh. Or Guided By Voices. Or The Thermals. In my experience, the ways that bad rooms dominate a recording are in ways that are really obvious. For example, bass...

I agree with Smithers, Don’t go looking for gear. Make the most of what you have. Experiment with the mic placement, positioning of yourself in relation to it, and so forth. Try out the SM57 in parallel with the Blue, and blend them to taste. Try recording in the bathtub. Etc. It just takes time...

I use a Tascam DP-03 for tracking and it has a remote footswitch so you can control record, play, punch-in, and go back to set point all with your foot. This revolutionizes the tracking process. I tried googling for “Audio interface with remote footswitch” to see if I could find a...

This is the original problem from the OP. It's probably as simple as she needs to turn the output knob on the ART all the way counter-clockwise (because it is on top of input gain on the unit) and then adjust the Portastudio down until it just barely isn't clipping anymore. (After making sure...

You're both literally just speaking in generalizations as though they are 100% right all the time. The ART Tube MP has a variable output level that is max +10. This is a direct copy/paste from the manual downloadable on the ART site: There's no attenuator necessary here. There's an output...

"Lots you have to learn about gain staging." I don't think so. What I've said is true or you can correct it. Ad hominem fallacy right here.

While true, that doesn't make too much sense in the context of this specific question. The gear OP has is set up to accept input level between -10 and +6 so any level in this range is acceptable. The only reason to use an attenuator in addition to everything else in that chain is if there is no...

I am not sure, you may have in mind the Tascam cassette-based recorders. This is a digital recorder with the following specs: XLR [BALANCED] Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD) Input impedance: 2.4 kΩ Standard input level: −8 dBu Maximum input level: +8 dBu Standard jack...

Hi ecc83. Just want to offer another perspective. I am a software engineer by trade and I suppose that qualifies me as a "computer whizz." I hold a computer science degree and a masters degree in software engineering and have about 20 years experience in the field. You have most likely used my...

What makes you say the Tascam is geared towards "low signal level." The Tascam has multiple input settings as well as a switch on the back for selecting various input levels which includes line level.

@Emma B I'm sorry that you were misled here. It's hard to read this thread and see such confident assertions made which are actually wrong and ignorant. Let's take them in turn. Actually the TRIM control on the DP008EX is context-specific. It depends on: a) the port being used in the back b)...

Oh well it's still useful to the rest of us

rob aylestone's suggestion is the best one imo. Compression will make the raspy part more noticeable. A targeted EQ in the right place is the most likely to reduce it.

@HomeRecordist I also have a DBX 286s and what you experienced really doesn't make any sense to me. Even with a passive ribbon mic there's enough gain in the DBX. Can you talk about how you actually wire things together? Unless you have a faulty unit, there should be nothing wrong with an...

What does this mean

I have a single humbucker (bridge position) strat with rosewood fretboard and an SSS strat with maple. Personally, I vastly prefer the SSS even though the humbucker one has a coil-tap for single coil mode. The SSS can cover more ground and is much clearer when used with fuzz pedals. Sounds...

I do not have these exact products but I do something that is similar. Here's how I approach it: 1. I enable the click track on the recording device (the equivalent to your Zoom R20) and set the BPM 2. I set the SR-18 to the same BPM. 3. I arm the recording device. 4. I hit record. 5. After the...

I have two of these. Cardiod pattern mics. They are in excellent shape. You can buy both or just one. They are exactly like this sold ebay listing and I have photos and videos I can furnish. Shout at me if you are interested. They're great for drum overheads or micing any acoustic instruments...