Search results

I have a problem with my delta 1010lt. I have been using out 1/2 to go to my mixer and then out to my monitors for studio monitoring. Well my Out 1 has went out for some unknown reason. I want to route everything to out 3/4 but I can't figure out the control panel/patch bay. The signal keeps...

thinking Would one of those new 24 track HDD ADAT machines work?

minimum The minimum amount of tracks i would need to record at once is 24.

I am doing research for a church that is looking at buying professional/or as near as they can get equipment. There needs to be 24-32 inputs. Preferably 32. The budget for the equipment is 5000. They already have all the mics ect... I just want to know what kind of system you would suggest...

I had the setup perfect on my old computer but it got messed up in the transfer to my new one. I have it set up so the monitor for my mike/guitar that I am recording is controlled by a separate fader on my mixer. For some reason though the sound is coming through my computer outs on my delta...

built it So I built it last night. It was 8 hours of hell but I could do it again in 2 hours. Funny huh. I had some grounding issues with the case but solved that with tape over the contact holes and paper washers. I only have four screws holding the motherboard on right now so I have to go...

startup Thanks for the advice. As far as keeping things clean I should be fine. This machine will never be connected to the internet so popups and other junk should not be an issue luckily. I do need to watch when I install programs though that they don't automatically startup in the background.

RAM speed When I add a second 512 chip will I be able to use the dual speed? How do I set up the memory to a fast speed? With this much RAM will I be able to run approx. 30-40 tracks with plug-ins smoothly?

made the purchase I just ordered the last of what I need. Daffydrunk I went with the PC 3500 that you suggested. Only one 512 stick and will add more when possible. I'll let you guys know how it works out. Jimmy

ram question So I can use PC3500 with my setup and it will work good? What's the advantage over PC3200? The 512 chips are 92 each?

RAM What's the best RAM for overclocking. I want to overclock my 2500 to 3200. I am going to be using 2 512's giving me a gig of ram. I made the order for the first half of everything I need. I ordered it from NewEgg.com. All I have left is the RAM, the hard drive, and the DVD burner. I...

RAM What's the best RAM for overclocking. I want to overclock my 2500 to 3200. I am going to be using 2 512's giving me a gig of ram. I made the order for the first half of everything I need. I ordered it from NewEgg.com. All I have left is the RAM, the hard drive, and the DVD burner. I...

fan The lighted fan is in the rear. So I can take the fan I buy and put it there then take the lit one from the rear and put it on the heatsink and that's all I need?

Matrox G400 I just Purchased the Matrox G400 for 23.80 (that includes shipping) on ebay. I'm pretty excited.

the fan I'm thinking about doing the following. Using the stock fan that is on the case and then the Speeze heatsink with the following fan on the heatsink. Vantec ''Stealth'' 80mm Case fan,Model:SF8025L Sound good? That should do it correct?

cooling setup So I have to put a heatsink on the cpu and then a fan on the heatsink? Is it a specific kind of fan that sits on top of the heatsink? Then the fan on the case will work correct?

Cooling fans I was thinking getting two of these and putting one on the rear and one in the front Vantec ''Stealth'' 80mm Case fan,Model:SF8025L and then get Speeze''FalconRock''CPU Cooler for Socket A/370,Model: 5F286B,Retail Would this count as the heatsink for the CPU? Would these...

heatsink So I need to get two 80mm fans and mount one in the back and one in the front?

cooling options I am getting ready to order the above parts next week. What do I need to get in regards to fans/heatsinks and other cooling devices. I want to overclock if possible and also keep the sound as low as "possible". Does the fan size matter with the case that I ordered. I know it...

case order I ordered this for 36 including shipping POWMAX Case with Side Panel Window (Black), Model "CP03294HL-5" I had to meet everyone in the middle. I can't really afford a high dollar case but don't want a completely cheesy one so this is what I settled on. Daffydrunk thanks for the...