Search results

I finally got to working on brake solenoid problem and figured it out I’m sending a pic. There 3 pins ones a white wire coming from solenoid, the other is a cap. ground side and a brown wire all three are suppose to be soldered together but there was a break between the brown wire and the cap so...

Every time family gathers around my place they always leave soda cans, once they leave I poor the leftovers on driveway it's good for removing stains that's the only use I have for coke. My wife past away this Christmas from the Covid but before that she was on dialysis, she had end stage Kidney...

Your right it was the left motor and only in fast wind, I just didn't frase it correctly, it was fine in play mode, I opened up motor and checked the bearings first, the one above the commutator was bad so I replaced bearings on both motors, sounds good and runs fast now I cleaned the gaps on...

I had already cleaned the motors before, used alcohol on the commutators got all the carbon out but never used the razor blade. I opened it up again and cleaned between commutator real good but when taking motor out I noticed the Black ground wire wasn't soldered at all. Yeah I'm a genius must...

Thank you for getting back to me. I changed all the Capacitors on power supply I started to re solder all the boards and found c550 on the mainboard was loose and making contact with wire on plug right next to it. that took care of the problem with the fuses. So next I opened the motor to try...

Would a Capstan motor cause PSU fuses 405 and 406 to burn also a capacitor 25v 100uf