Search results

I have one I'll sell. It does need some work. The motor assembly makes a thumping sound. Could be a bad belt. A guy named Fred Marrs can sell you a fresh belt for nearly any tape deck ever made. He's well regarded in the taping community, although a few people who live outside the US have...

Talking about the one on her first album. Anyone know?

Excellent info. We don't usually consider the effects that unused jacks may have on the signal path.

One special signal processor for vinyl mastering that I know of is the elliptical equalizer. This concentrates the bass sounds towards the center of the soundfield to prevent the stylus from jumping out of the groove at playback.

It's very rare for ICs to go bad. Bad electrolytic caps are much more common. In fact, that's the most common failure in old electronics. The ICs you reseated probably had dirty socket contacts that were cleaned by removing and reinserting them.

It may not be a problem if you don't use it for tracking. When you set a mixer up for tracking, you want the test signal levels from all tracks to be the same when you play back the recorded test tone. It was a problem for me because some channels appeared to be dead or have greatly diminished...

I think once the OP tries to calibrate the mixer against a multitrack recorder, he'll find some recapping is needed. I'd start with recapping the group bus cards, as that completely solved my calibration problem with the M-308.

The advice given above about room treatment is critical then. If you make a recording in an untreated garage, nobody will be surprised it was made in a garage. It will be apparent to all. Yes. The KEF speakers on Ebay that I linked to earlier would not only make better monitors than the...

As far as I can see from a brief look at the manual, the Spirit Folio isn't well suited to multitracking, as it only has stereo tape outputs. You'll want a mixer with enough tape outputs and inputs for all 8 tracks on the 238.

Do you have a decent stereo amplifier? If so, a good pair of speakers will work. There's nothing special about "studio monitors" in that price range. Two KEF C25 Bookshelf Speakers Black | eBay

Bome's MIDI Translator. It'll do whatever the hell you want. MIDI Translator Pro | Bome Software

If cassette tapes become scarce in the next few years, I may start selling off my large stash of sealed Type IIs. The current market prices are too high for me to want to buy more, but not high enough for me to want to sell.

Did you find one yet?

I suppose I could, but it wouldn't sound right. I'll leave the Perry impersonation to Arnel, since he's better at it than I am. :D I think his brogue is interesting, but you're right, his tone on the other song is lacking in clarity. Zach, try working on your enunciation. You have a nice...

Any compressor can cause ringing if you overuse it. Apparently MBC offers more opportunities for things to go awry. Couldn't you accomplish about the same goal with a side chain EQ in a regular compressor?

Your voice sounds nice on "Let It Go," although you sang it in a different key than James Bay did. You may be able to your improve your pitch if you listen and sing along to vinyl records instead of MP3s. Sounds like an absurd idea, but that's what worked for me. Another thing I've learned is to...

We would need to know how you have everything hooked up to be able to diagnose the problem. Here's the owner's manual if you don't already have it. http://www.vocopro.com/products/pdf_manuals/kj8000pro.pdf

Influenced by Tangerine Dream and 80s smooth jazz, am I right? Have you checked out Fire Tiger yet?

That would explain why I couldn't hear the bass... :D

It's been so long since I heard that album, I had to look it up on YouTube to hear what you're talking about. The drum reverb works on "Enter Sandman" and "Sad But True" because the vocal and all of the other instruments occupy a frequency range that's higher than the kick drum and lower than...