Search results

You might just want to pick up an Sm57 for around $100....it's a good "starter" dynamic mic, and can be used on vocals and instruments. I doubt if the keyboard will record audio, so you will need to figure out your recording chain.

What is your budget? That will help weed some things out. :D

Clean up on aisle three!

I am not sure why you wouldn't at least try out the mic and see if it worked. Honestly, I don't even see anything in the pictures, so as mentioned previously, it might be a mic mishandling situation, instead of a mic drop. It was shipped to you, so it got banged around a little on the way, I...

I'm not really seeing anything major. Is it on the right side in the picture? Does the mike work fine? Maybe ask for a few bucks back from the seller if the mic works okay, and bend it back into shape yourself.

You need to figure out your track routing for recording and V track assignment for recording and play back. Have you looked at the V track menu to see what V tracks you are using, which V tracks have data, and whether or not the routing and track assignment is set up the way you think they are...

That would probably work....or any audio interface.

Go to VSPlanet.com and do a search there for the info you are looking for.

You can only select a single V track for recording or playing back for each track. If you are truly recording to different V tracks on track 1, there is no way to play back what was recorded on say 1-1 while recording to 1-2. You just can't. You can't use tracks 1-1 and 1-2, for example, at...

My ebay is the US ebay. I guess Wales doesn't have the ebay. My science can be very intimidating for the young and foolish. Beware! :spank:

Prices for recent sold auctions on ebay for these guitars range from $500 - $800 US.

TeyshaBlue

I just re-read your OP. You also need to put the R16 in interface mode. Press the USB button and select the appropriate options on the R16. Look in the manual for additional information. It can also be used as a control surface at the same time....that's a really nice feature.

There is no factory reset. You would need to reload the original patches back in. JUNO-106 CONNECTION

Are you getting any signal in Cubase? Like 2 channels, but just not all 8? Do you have your Bit Length set to 16 in the R16? I believe it has to be set to 16 to get all 8 track on the USB connection. If you have it set to 24, you will only get a 2 track mix (main outs) and not individual...

Just run the direct outs for channels 1 - 8 from the mixer into inputs 1 - 8 of the R16. Control the input gain on the mixer and turn down the R16 input gains for all channels. Should be pretty simple. That should give you 8 separate channels from the R16 to Cubase.

VS-Planet Forums - Powered by UBB.threads™

You probably have something set up incorrectly with the routing, creating a feedback loop. Check your routing. How are you monitoring the audio output?

Nice review. Thanks for sharing. Don't be afraid to lower the pickups if you think they are too close to the strings. It might just need a little tweak. Enjoy!

Go to VSPlanet.com and ask your question in the vs880 forum. VSPlanet is the place for support for the roland recorders.