Search results

Me Either... It acted like it went through the whole burning scenario. But, it never really burnt anything. Haven't had time to try it again.

NT-1000 Future Add-On.. Tukkis, I have a pair of NT-1000s. They are great for many situations. Even as overheads for drums. But, I ended up buying a Presonus *BlueTube* to mellow out the vocals. These are great microphones, in my book. Very versatile...

Oh Good Lord Almighty!!! I thought this thread was to bolster RATS on finally getting CEP2... RATS -- How have you been doing with CEP2? Anything you have questions about? Rmember, others most like have had the same experience, and can benefit from knowledge. RD423 -- There has been a...

Do Less Work - Get Better Sound! No wonder you sound frazzled! OK, first off... Let CEP do some work for you. I'll give a brief explaination and some links... Make an Easier Microphone Placement. -- Take your two C1000's and place them between 40 & 60 degrees left and right of the drummer...

Rats - Make sure you are not creating 32-bit files! I did this a few times when I first started using CEP 1,0. Look in the lower right corner. It you don't see *44100 - 16-bit - Stereo*, press the *F11* key and convert accordingly. My Dynamics Processing is fine for me. If you have the...

Lovin' CEP 2.0 -- Legit! Rats, you will like CEP 2.0 as you use it. Enjoy I know budgets are tight with some. But, please at least indicate your intent to go legit! I want to see Syntrillium put out a *bug fix*, as it were. If we don't pay, why should they offer? They deserve their...

Tex (& others), I used to think the same thing. I used to think Dolby-B was good enough. Then, Dolbly-C. Then, Cassettes no longer sounded good enough for the car, anymore. When I didn't know how to use the tools properly, they did more damage than good. Now, it's another useful tool...

I am guessing you are using the output of a tape monitor on your stereo receiver.... Did you choose the right pair of inputs on your sound card? Some cards have more than two channels. Check the Settings and see what your default input channels are for recording.

Whenever possible... Some instances are not practicle, such as live performances with noisy crowds in the track(s).

After the Tape Hiss reduction, go into the Dynamics Processor (located in Amplituded. Once there choos a flat response curve, the select the Spline box. For the louder voice -- Build a reduction curve (on the top right) to get a decent reduction in the high gain point. For the quite voice...

Need To Sample It Out I have the system run several seconds in record mode BEFORE any tracks record. I ususally just ask the band members to sit very still and quite for about 10 seconds. Then, after the recoding is done, I go back and sample at least a second of the supposed quiet part in...

Going Beyond Clip... I have had times where I went above *clip* and was able to recover. I don't like to do it, but sometimes get there. Here is what I found (with CEP v1.2a)... I record in 24.8-bit or 32-bit, and the gain is up enough to ride close to the *zero* line. The...

Is This The -10dBu/+4dBV Issue? Going between "balanced" & "unbalanced" inputs/outputs, you are going to see an 11.8dB difference. I had this issue when I ran some old Behringer mixers with "unbalanced" 2-pin cabling to a standard amplifier. The preamp automatically would be 11.8dB lower...

YES, but... I followed the links on the Syntrillium web site to... http://www.syntrillium.com/cep/upgrade.html It seems to be the pricier of the upgrades, but still worth evry cent!

http://www.AudioMaverick.com My site is pretty much dedicated to Cool Edit Pro on a PC, and some things about recording in general. Have a look! http://www.AudioMaverick.com <-- Clickable URL I guess I will need to update my site for CEP v2.0, now (:>)

Figuring Pitch Shift OK, here is a quick guide -- -- 7 notes on the cleff -- 1/7 = 0.142857... So, roughly speaking to change the pitch upward from an *F* to an *A*, you would use --- 1 - 0.142857 = 0.857143 (or 85.7143%) NOTE: You are going *faster in frequency or time, so your final will...

Thanks, Shaky Tee... I have the latest M-Audio driver for the Delta-1010s. But, I forgot to go through the Services. I first loaded XP on a P-III board, which ran great. Then, I decided to upgrade to a P4. So, I reinstalled everything from scratch. I didn't go through the Services. In...

CEP_v1.2a & XP_Pro ... So, So... I just got a chance to run my new PC through the paces, tonight (or last night). I had a couple of timing issues where the system seemed to just slow down. And, I had one premature application closure with CEP. This was all in a 14 hour session where I...

kevmc, were just trying to figure out how to get all of your tracks into one final stereo WAVE file? If so, in the *Edit* menu is the *Mixdown* option. You can choose to mixdown all the waves and create a single stereo (or mono) file. Hope I read your question correctly. And, by the way for...

Works for me... Are you in Cool Edit Pro... or 2000? I'm using "Pro" and have slowed the tempo while retaining the pitch, in the sameplace you've been. When youare in the "Stretch" panel, do you see the options in the lower left [ie- Time Stretch (preserves pitch)...]?