Search results

  1. 8

    Error 9073 - Drive to slow... any fixes???

    same I have been getting that same error msg too! I tried opening a small session and got the same msg? I tried opening a larger session same thing. A freind told me that it is the firewire cable??? So off I go to buy a new one to see if that works???????
  2. 8

    How good is Yorkville YSM1p

    I have a pair of your Yorkies as well for the last 10 years and a set of the first Monitor one"s which use for out monitors for my Digi 002 and my your yorkies monitor from the board for mixing. I like the yorkies because they are pretty flat and not pretty until you get the mix just right.
  3. 8

    Out of curiousity:

    I use reverb on backing tracks,and or Adlib tracks on a mono track panned left or right for flavor.
  4. 8

    Post wizard needs pre advice on a mic

    What kind of mic? What software are you using?
  5. 8

    Marimba Miking

    Marimba do also come with motorized vibrato, 1,2, and three speeds, my vibes have three speeds, but a manual motor that you have to change by hand not a control knob type. But Frye try all of the different mic set-ups until you find one that you like. A lot of walking back and forth until you...
  6. 8

    Marimba Miking

    I have a old Decca vibe unit that I play, when I record I generaly go with a large condenser in the room,a small condenser on the bottom and a small overhead. Some time I go with the two condensers over top and a large condenser in the room. The room will have alot to do with sound that you will...
  7. 8

    Do I still need a preamp... ? detail inside... plz help !

    What software are you using???
  8. 8

    Equitek II (CAD mic) I need your experience!

    re-charge for about 24 hours!
  9. 8

    Group Buy Interest?

    I tried the link again myself, and it work this time? but not always? I paid my shipping three weeks ago and still no green light?
  10. 8

    Pro tools volume

    Try going to new tracks, option ,select stero> audio> Master Fader>create and shold have a new master Fader.
  11. 8

    Signal Routing

    For your seprate headphones mix for each persons in the group you may want to try the Furman hd-6http://www.musiciansfriend.com/product/Furman-HRM16-Personal-Headphone-Mixing-Station?sku=241504
  12. 8

    Finding the weakest link

    How's your cables? great cables make for a Great sound!
  13. 8

    Sequencing BFD and Syncing Issues w/PT 7.3

    Sync I wish I had known ahead of time that Pro Tools digi 003 was going to have a BNC cable out-let, but oh well1 Anyhow you should be ok using MTC or MMC with your set-up in Pro Tools. Make sure that in set-up you choose external clock setting and assign a SMPTE offset and time code at the...
  14. 8

    EQ Mag

    mags I find Tape-Op and EQ to good mags, they are the only two that I read on a reguler basics.
  15. 8

    Quality question.

    That is a big start! Have listened to some monitors for playback? what software do you plan on useing to work with your puter. and also you need a digtal inter face to connect from your board to your puter. You will also need a bunch of cables to hook it all up. Om top of that you will need a...
  16. 8

    Digi002R and Aphex 204 connection?

    204 Your Welcome!:)
  17. 8

    Digi002R and Aphex 204 connection?

    204 Not at the same time. But you could run your gutar through it when you laydown your guitar tracks, then re-wire it when you do your mix down.
  18. 8

    Digi002R and Aphex 204 connection?

    204 I don't own the unit myself, a freind of mine has one that I have worked with. Basicll you run out of your 002 monitor outs into the in of your 204 and out of the 204 into whatever you are mixing down to Dat, CDR or analog tape machine. If you want to come out of the 002 useing the 1 thru...
  19. 8

    Digi002R and Aphex 204 connection?

    204 What is it that you want to do with the 204? Do you want to use it at mix down, say to DAT or ADAT? Do you want to use it for effcts? or as a pre amp going into the digi oo2r.
  20. 8

    a bit of help here...

    ? How much money do you have for a budget to buy theses toy's?
Back
Top