Search results

offer them 3 of the songs for the extra $200, and all 6 for $300. If they choose to only take 3, you only loose $100, but they loose almost half the deal. If they have any sence they part with the extra $100 for all the tracks.

sorrry - yer acoustic bass guitar.

Im working on a project at the moment that will have an acoustic bass. NOT a double bass, but a standard acoustic one! Ive have plenty of mics avalible to me - c414, nt1x2, nt2, nt3 x2, 57x3 d112x1 and some others. I intend to use a DI out from the bass - and a body and neck mic. I was...

cheers for that, the kick has been one of the problems, getting it to cut through the guitars. The problem with going to clicky is at times the guitars drop out in some songs, leaving a kick thats to clicky. As for the high pass and double tracking, thats already been done. Cheers

I just spent the last few days recording a metal band. Im good friends with the band so it of no cost to them. But now the mixdown time has arrived i feel in need of a few tips. I mostly play and record acoustic music, so this is all new for me. The band use the regular chainsaw distortion...

i use a g5 and used garage band for a few weeks before logic arrived. It was ok in that i could demo some songs very quickly and easily with no real setup needed. But, if you want to produce high level work youll need to upgrade. I used GB1 , and it therefore only supported 1 in, plugins werent...

Bassically i use a imac. g5, with logic express 7, and an edirol fa 101. Id like to be able to use some outboard effects and processors with this system, but without mixing on a external mixer. so bassically i want to send my signal to the prossesor, and back to the computer, ideally through the...

Bassically, what the difference between Peak and RMS compression, and were is it better to use one over the other?

Cheers for that, its just the ticket.

Ok, so im bringing a recording project to a close (my own songs). The recordings have gone well and now im looking ahead to mixdown. Id like to use some multiband compression on the bass, mainly to play around with using it, and learn how its done and party because i think the bass will thank me...

I havent ever used this software but im guessing its will all the other plug-ins on the channel strip controls.

Im with you - i would say it was the cable if i read this post - or the fact that its single coils being used - But its not this! Ive got a few other guitars - and lots of other cables - all the same. I study music at collage so take my amp in quite a bit and therfore use it with other peoples...

Cheers for the help guys. - The hum is only there when the cord is connected, silence once its removed. As for turning the amp or guitar around, its doesnt help me. Ive tried all these things before i asked here, but had no luck. Im sure its just the way of the amp - but that leaves me the...

I cant see that any of the possibilitys is going to be the problem. Ive tried all these thing before with no luck. The hum is the simple sound that the amp make once its turned on. Its a Line 6 Spider 212, Guitar is a USA Tele Deulux, im using a nice, new fender cable, amps in a seperate room to...

Ive found myself having this problem whilst recording my latest EP, which im aiming to be of very high record quality. I find that on some e.guitar overdubs, when i play part that dies out e.g - stum and chord and leave it to ring out. - as the guitar sound drops, the amps hum slowly becomes...

I tend to record a lot of my electric guitars DI, then send that to my amp later. This is a new thing for me, but i find it to be much more practical for me. This way i can get the performance im happy with before cranking up the amp, it also alows be to play around with mic possition etc...

Just a simple question about patching. Bassically i just want to check im doing this right! Ill be using a patchbay with switchable modes so its easy to alter anything in future. -to patch my insert points ill need the patchbay to be normalized? -to patch my soundcard ins out it wants to me...

cheers for that guys. Let me know what you think of the MG24, there nice looking desks!

So im looking for a mixer with a wide range of ins, outs etc. Being a student, studying music, i have no real money but need my gear to be of a standard. It will be used mainly in my recording chain - hooked up to a Edirol FA 101. But it will also follow me around at gigs. The MG 16/4 fits my...

avoid the behringer, noise, scratchy eq, just crap. The yamaha will do you much better for similar money.