Search results

Thanks Crud, I did try the "all input" feature with no luck. I also checked to see if the signal was passing through - still nothing. In the morning I'll check back to see if you found the "seating" procedure. I'll look too. That may be the cause. The Alesis was shipped to me via UPS. They are...

I found the procedure on rec.org - power on while pressing play and record. No luck! Help!

That may be it, I've poured over the manual to no avail. Anyone know the system reset sequence?

Thanks, but I already tried that. I should have included it in the original post. Sorry STILL NEED HELP!!!!

Hello, I rented a Alesis HD24 for a live recording gig tomorrow as a back up. I'm testing it out to get ready for the gig. It won't recognise any analog input. I know the signal is getting to the end of the cable, but the Alesis isn't listening - or at least it's not showing it on the meter. Is...

I can't say for certain, but I believe that's the same transformer Shiny-box is using in their mics. I put one in a Oktava ML52-2, it was a noticeable improvement.

In case anyone is looking for good PA pieces. See the below auctions. Everything is in like new condition. JBL MPRO MP215 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7407935857&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 Mackie 808s...

If I had the time, I'd definitely make the Y cables. Thanks though. I'm all set with the board. Pre fader, pre EQ, no inserts will be used. Thanks again, I'm glad to learn this should work.

That is the plan. thanks for the help!

Thanks, I've been reading it. No help as far as I can tell.

Hello, I will be renting an Alesis HD24 in the near future to be a second/backup source on a remote recording gig. Will the outputs of the HD24 send signal to my 002r while it's recording? Here's the plan Board channel direct outs --> analog inputs HD24 / analog outputs HD24 -->002r is there...

I've been looking for this shootout, where can it be found?

This guy on ebay is REALLY helpful!. I recently bought two kits from him and performed the mod myself. I found the service after the sale was informative and the information and little pictures he included in the kit was invaluable. Well worth the money. So was the mod BTW. really opened mine up.

Good idea, i hope sharpies like it.

I just got a last minute live sound gig. Is there any good tape one could use to label a sound board? Specialty stores are not abound where I live, so any suggestions of over-the-counter, OSCO, Menards, etc. tape that won't leave a nasty residue (like duct tape) would be great. I figure...

Suprisingly, the DIY Omni that Tape Op published a while back is what I use for my tenor (close miked). http://prosoundweb.com/recording/tapeop/buildmic/buildmic_16_1.shtml I have a Rode NTK, Earthworks SR71, Beyer M201, Audix OM2, EV 468's, Oktava Mk012 (modified), ML52 (modified), etc. and...

It's in a Recording Magazine article from a while back. Not sure which one off the top of my head, but it's easily searchable. I got the parts on ebay via member sitlerwds. He was very helpful both before and after the sale. http://search.ebay.com/_W0QQsassZsitlerwdsQQhtZ-1 25ish if you want...

Not UK but may be worth your time http://madisound.com/

I did just that once. I thought it turned out well. Two things I learned while doing it: 1: Since these instruments really don't sound complete until you get out away from them a bit, your room acoustics play a big part. 2. There's little to no helping a weak player in post production. So get...

If you're a DIYer check out the Tape Op magazine DIY Omni's based on a really nice Panasonic omni capsule. I built a pair for I think $20ish and honestly they're some of the better mics in my locker (actually more like a milk crate). Set up those two with a Jecklyn Disk and you're good to go...