Search results

Mine is a 15/30, which is why I was asking. Is this an oddball??

You know, come to think of it, I don't have a manual for my 32 either. LOL I've got a 38 so I guess for me it is similar enough that I didn't need a manual. I do have a question guys. Did Tascam make two variants of the 32: one that does 15/30 and another that is 7.5/15? Just curious.

Do you have it directly connected to the computer, or to a USB hub? A USB hub can wreak havoc on interfaces. I'd definitely say to get more memory. Check the latency setting in the Tascam ASIO software. Adjust it up and down, keeping in mind what the original was in case you need to put it...

Hehe, I didn't mean to say you had to disconnect and reconnect them every time. I just meant that if you were going to, make sure the power is OFF. Sorry about the confusion guys.

ALWAYS plug and unplug with phantom power OFF. When you turn it off, give it about another 30 seconds before you unplug the cable just to make sure the voltage has bled off.

Tascam used an 8mm video tape and it was called the DA-88. :P

It's not impossible that something has happened. I would say that something has been connected/disconnected at some point while the phantom power was on and possibly damaged something. Just a guess. I've got a US-1641 and haven't had any problems with it.

I had a BSOD right in the middle of a recording session once or twice. About shit myself. I found the latest drivers for Win7 and installed those. Worked like a charm ever since.

Glad I could help!

You might get better response from "The Rack" section of this board, since you are asking about outboard effects.

No problem at all. It will export .wav files, via the on screen menu. You can then connect to a computer via USB and copy the files from the "WAV" directory.

I would imagine you could use a pair of patch cables containing a pair of RCA (phono) to 1/4" TS (mono) ends. Connect the RCA ends to the line out of the VL3D. Connect the 1/4" to each of the 2 inputs of the DP-02. Make sure you set the switch next to input "A" to "line" instead of "guitar"...

Are you trying to go from the line outputs on the VL3D and into the DP-02? Sorry for the goofy question, but just trying to figure out what exactly you are wanting.

You are most welcome. The DP-004 is a 4 channel unit, but only records two channels at a time. In order for you to record the organ and the piano, you will only have mono input from the organ so you can keep the 2nd input free for the piano. It would be nice if each of the inputs were...

You have to be careful setting the in and out points to create the master. Also, did you save the "song" after mastering? The DP-004 can be a little tricky to get it right sometimes. Something else to consider is to just export the tracks themselves (without mastering) and copy them to the...

I don't see why it would make a difference. The license is just for the software itself, regardless of platform. Wouldn't hurt to ask the guys over on the actual Reaper forums though, if in doubt.

Unfortunately, as of the digital era anyway, Tascam hasn't had all that great of manuals to accompany their products. You would be best off having the organ auxillary feeds going into both of the inputs on the DP-004. Something to consider: make sure you have the updated firmware for the...

A dirty pinch roller (the rubber wheel) can cause some slipping, but I don't think it would cause the tape to come off the roller. Now a bad pinch roller would do that, if it is hardening. I had one or two do that. Replaced the roller and all was good. Just a couple of things to look into.

Glad to help any way I can. Just for giggles, what exactly is the reel side of the 388 doing or not doing? It obviously powers up, if you are going to use it for a mixer. When you have a tape in the deck, does anything happen when you press FFWD or REV or even PLAY??

Gaetano, that is an awesome summary. Thanks a bunch! I don't gig, and I've got a Roland Micro Cube (for when the wife and kiddo are home) and a VOX Super Berkeley III for times when I can "let 'er rip". I think I just might order the TL and sell the ME-70, if the TL has a decent reverb and...