Search results

At this point, I'm more concerned with the lack of erase function. I didn't mention that, it's all tracks that don't erase. Too, Just an observation. My head connector configuration is not like the photos in the manual. I realize there is space for 4 connectors, and The ATR only uses 3. So...

That's what I was thinking too. The osc. is assignable to the PGM buss section. At this point the level is adj. at all 16 buses. At that point the Osc..is adj.to each output to recorder by the individual buss faders. Is that what you meant? It's just, I get hung-up on totally relying on the...

Yea, seems as you learn, as with anything... (like woodworking) for instance,you start with a Sledge Hammer then you learn..all you need is a Finish Hammer! I use that analogy, as I was a Carpenter for 35 Years. That said. I'd like to figure out, how to use what I currently have. I don't have a...

Hello all! Hope everyone had a great Thanksgiving. I know, I did. I finally got the ATR60 tracking problem sorted out. Turned out to be a combination of Reel height, and Tension Roller height problems.. So it's off to the Electronics Calibration...screech!..stop. Now, I'm confused. I want to...

Honestly..I find it EXTREMLY hard to check the Tension Rollers height with that "Kidney" shaped plate in the way. Also, I don't know how significant it is, but the left Tension arm spring looks different to me. I suspect this is the one that was replaced as it is newer looking, and the piece I...

Somebody already beat me to it! FF(T) and REW(T) are already fully clockwise! How am I suppose to set this...40.91 really? .91? where's that? I'm a inches guy! With this?

Knucklehead question. How do you read the scale? numbers above the line? what are the numbers below? Can I assume my meter (shown below) will only read to 140 grams? Thanks, Ron

Got the lifters turned. Found, that by using a open-end wrench on the lifter base (the size of the rectangle) and then needle-nose vice grips (my description), for the lifters, I could spin them without removing them from the deck. I also, took the opportunity to spin the tape guides as well...

Or...this ;)

Hello, I've been searching this forum to find about rotating worn tape lifters on these machines. No luck. I came across threads mentioning it on these models, but nothing describing it. As I study the parts exploded view it seems the lifters are attached to the base solidly. Has anyone here...

I want to get a hand held multimeter for checking signal levels on my various equipment. I get lost on ebay. there are so many models. And most don't list the specs. Rather than just throw (more) money at it, I'd like to hear what some of you use and why. I don't have enough knowledge to really...

Thanks sweetbeats for the response. I realize how scarce this model is (trust me) !:mad: This board is indeed all ballanced except the Direct Outs. Too, all the connections are by way of D25 Subs. I think Tascam copied the idea from Neve and SSL. They all terminate into D-Sub (rear)/TT/Bantam...

Hello. been awhile since I've posted but...I've been around. Today I was checking the levels on the board. I engaged the on board oscillator set it to 1K And started sliding the PGM busses to set the VU meters at 0VU (nominal +4). All except buss 3 are close to the 0 mark on the fader scale. But...

I have been trying to research the different models of the 50 series R/R's. I've seen two different models of the 52. One has the input and output settings on the face. The other does not. And then it seems I've seen two different 58's. One has the finger debit on the tape guide (for edits) the...

So Far!

I'm looking for a duel recording double well, CD recorder. I use to use one, at a church I did sound for occasionally. It was great because I could record the praise and worship on one side and then hit the change button on the other well, and record the sermon. Thereby recording the whole...

I'm struggling with ways of connecting outboard gear. mdainsd, For instance..how would you connect the monitor speakers with 1/4 unbalanced inputs? Or a tascam 302 with only RCA ins and outs, with this all balanced (Except Direct in/out) board?

Yes it is, but no it don't. No right side audio back from the tape Rtrns. Mine has the added 8 channels.

What's got me stumped, is the fact that with no patches the recorder's signal only comes through in the left on the master meter and through the headphones.. I have the console and recorder connected as per diagram shown earlier. That's the suggested by the manual. The only difference is the MTR...