Search results

Installed new CUSL2-C. Seagate 30gb 7200 ata66 drive as master on primary ide controller, and Plextor 8/4/32 cdrw as master on secondary controller(this handles all cdrom chores). P III 800 eb, 256 133 ram., The manual says that if your harddrive has been installed on a previous system, you may...

I've been looking at new CPU's and noticed that 100mhz front side bus PIII's are either rare or not made above 800mhz processor speed. 100 FSB coppermine chips are labeled "E" and 133 chips are "EB." Now, AFAIK, the 440 bx chipset is not made to run over 100 FSB. So, if you want a 440 bx...

Installed a new video card: ATI Radeon VE for dual monitor support. Just trying to get it to work with one for now. The screen looks wavy, like a gently shaking box of water. I can make several adjustments in the software but can't make it any better. One thing I can't adjust is the refresh...

I've been using Logic Platinum 4.1.4 and just starting to get the hang of it. I finally decided to pop in my upgrade disc for 4.5 and now it's almost like a different program. Before I get too used to it, I was wondering if anyone considers another version to be better- less bugs, easier to use etc.

I made a fresh installation of 98se using the optimization tips from RME's site: www.rmeaudio.com/english/techinfo/lola/lola.htm When Windows starts it always asks me to define a password as if it's the first time it's been installed. Whether I set the password or decline, the next time I...

I'm getting a UDMA 100 drive for recording. My board (ABIT BE6II) only has 33 and 66 slots built-in, so if I want to actually run 100 I need a PCI controller card. My MOBO manual gives the following info: - PCI slot 5(I have 5 slots) and the Ultra ATA/66 controller "use the same bus master...

I've discovered that not only is my hard disk DMA box not checked, but there isn't one there at all! The settings for the cdrom shows a checked dma box. I have a ABIT BE6II MOBO with 2 UDMA 66 controllers and 2 UDMA33's. When you first install these things, you have to hook up to the 33's then...

PIII 800EB Abit BE6II (440bx chipset) mobo Seagate 7200 30 gb drive Logic Platinum Delta 1010 sound card I HAD a Voodoo3 3000 AGP video card. I'm running the front side bus speed at 133mhz so the card was running a bit faster than it's supposed to. Built the entire system last year and it's...

I understand the advantages of two operating systems, and also two drives. I'm very unclear as to the actual execution. 1) Do you want all applications, including your recording app. i.e. Logic, on one drive and nothing but audio data going on the second drive? If so, then I assume audio apps...

The 98lite website, http://www.98lite.com, lists four different configurations you can use: "sleek", "chubby", "overweight" and "98micro". Can't quite figure out what it's all about. I read in another thread where emeric said he uses "minimal install, not micro". Could anyone clear-up what the...

Gigasampler's website says Gigasampler 64 comes with Sound Collection #1. What is this? An included sample set? If so how does it sound and how extensive it?

According to http://www.tomshardware.com, a PIII 600 @ 100 mhz FSB can be stable at an overclocked rate of 800 mhz @133 FSB but a normal PIII 800 can't be overclocked at all cuz it's just too unstable at such a high rate. So, is it better to: - Run a normal PIII 800 at a sure to be stable...

Thinking of going with a motherboard (ABIT SE6) with the new intel 815E chipset. Because: it's ready to go with UDMA 100 drives and 133 mhz memory. I'm thinking that 1)overclocking and 2)slocket? converters and 3)extra UDMA controllers are more trouble and expense than just getting a...

I don't quite understand a fundamental aspect of this whole process: what's the difference between programs like Cubase, Logic, Cakewalk and programs like Cool Edit, Wavelab, and Vegas Pro. My inderstanding is that the first group is sequencers? and the second is editors. Can't the first group...