Search results

Sorry my error on the source options for channels 1 & 2. I don’t understand what you mean by “Just use Channels 1 and/or 2 and assign to the other channels…” Assign what to the other channels?

The MIC | LINE | INST switch is not a routing or assignment control…it is the source select switch. It sets what input jack the channel listens to. If you are trying to listen to a guitar plugged into the INST jack, as @RFR already stated earlier, the source select switch should be set to INST...

What I’m trying to say, but maybe I’m not making myself clear or I’m misunderstanding what you’re saying, is because of your modified setup, the sweep range during the bias setup is outside the VU meter range. I’m suggesting the behavior of your bias level trimmers and what you are seeing on the...

Yeah it’s super unfortunate they made the motherboards out of phenolic resin and not glass fiber. Glad it’s working.

Never ever use a contact cleaner with lubricant on metal-to-metal contacts, either connectors or switches…so I would never use F5 on things like cardedge connectors. F5 is specifically for carbon element potentiometers. IPA is great for cleaning up dirt and debris, but it doesn’t treat and...

9V 50mA is 0.45VA. That’s almost identical to the two examples I gave you. Should be fine. I would not bend pins. You reflowed solder joints in both the motherboard and input modules? Did you maturely exercise the connections or just clean them, apply the DeoxIT and then reseat? Which DeoxIT...

So, if your cal tape is 250nWb/m, but you’re setting up your record side to print hotter relative to 0VU (by reducing the reproduce level by some amount, -3dB in your case), don’t you have to drop your input level by that same amount when setting the bias? Like take whatever the manual says...

1. The AT-RMX64’s rated power requirement is 65W, so I see no reason why a 100W rated step-down power transformer wouldn’t be fine. If the mechanical noise bothers you you can always eventually look for something higher quality. 2. The lamps I used in my AT-RMX64 are JKL DA-403. These are...

So glad you figured it out. This is what makes it hard to sort these things out online when we can’t actually see what you see. So it’s important everybody keep that in mind. Glad it was simple. I’m sure you’ll have other questions though now that you hopefully have an easier time passing...

Start by monitoring at the direct out jack for channel 1 to verify signal is passing through the channel before you try and figure out monitoring at the master section.

Did you read my post #31?

Please refer to my post #31 in your parallel thread for some guidance. But also heed @RFR’s suggestion to first just see if you’ve got good signal at the channel 1 direct out.

The brass is not critical…steel is fine, but I was talking about stainless steel…the one you linked is raw steel if I’m reading it right (or if my browser is translating correctly), so you’ll want to put a light coating of oil on it to prevent oxidation. Otherwise that would work. Your local...

Thanks, @RFR…that’s much better to get him going. Sometimes I’m too detailed.

You’ve got signal to the PGM 1 buss, but now you have to set the monitor section of the console to listen to it. Okay? You’ve got your inputs (channels 1-20), and those can be summed (combined) to any or all of 8 mono summing busses (PGM groups 1-8)…great…but now you have to set the monitor...

Here is a cross-section i drew up of the washer…it is not to scale. Dimensions are in millimeters: I believe the material is brass. It is a precision part. I’m reasonably confident you’re not going to find this off-the-shelf…i suspect this was custom made for or by Teac. The other...

Okay that all makes sense. Just follow the procedure in the manual. The 58 manual indicates to use 10kHz. I’m seeing now the manual doesn’t offer coarse and fine set instructions. If your azimuth is way out of whack (which shouldn’t ever be the case with either of your machines because the...

Ah okay. Cool. That tape is not the basic 100Hz/1kHz/10kHz tape, but also not as comprehensive as the tape with the full tone ladder. But those frequencies are good and will do a reasonably good job of helping you get your response curve setup on the playback side, and of course setting/checking...

So here is where we need you to be specific and detailed if you want help. 20 questions can be a fun game, but not here IMO. That’s just me. I want to help. But you need to help me. “I’m hearing it from several places…” WHAT places. Be specific. And walk me through in detail how each of the...

Just a couple comments…I don’t know what tape you are using, or what your plans are, but if you record hotter like that using a “+6” class tape like SM911 keep in mind you may run into tracking errors using the dbx noise reduction. This is because the closer you run your nominal record signal to...