Search results

Few of my PC's don't have a floppy drives anymore, so considering a USB connected floppy drive. Came to realize Windows doesn't appear to format 720k's from it's own utility, but can be done by a DOS command via command prompt window. What I'm not sure of is if a USB floppy drive can work from a...

Can't find one online. If you have one hidden in your archives would appreciate a copy. The QX3 I've got sometimes boots normally, more often it hangs on the startup screen. Might be a bad solder joint for the way it acts.

Just tried to play something on Soundcloud and it wouldn't. Bit of Googling I found ... https://www.soundcloudcommunity.com/soundcloud/topics/site-does-not-work-in-firefox-47-did-and-does-in-46-this-is-after-a-tedious-reinstall-of-firefox Disabled the VLC plugin and all seems well as of now.

What mic(s) are you liking for live vocals and is it cardioid, supercardioid, or hypercardioid? 1st - Sennheiser e935 cardioid 2nd - EV N/D767a supercardioid

Local CL seller has a used EV 635a at an OK price. Wondering if anyone makes use of an omni dynamic for vocals, acoustic guitar, or guitar cabs. Worthwhile addition or not?

This cable "might" work>>> Amazon.com: Hosa XVM-115F Microphone Cable, XLR3F to Right-Angle 3.5 mm TRS - 15 ft.: Electronics I have this cable I use with the stereo mic input on a camcorder. The cable is wired to take the mono output of a mic and put it to both the left and right channels of...

Not tried this, but rubber banding a pencil in front of the capsule is said to reduce essing.

Pin 1 should be ground and would likely be the black wire (ignore the black wire in the diagram below, it's a cable color and the shield is ground). You would need an ohmmeter to verify this between the black wire and the mic's metal body. Pin 2(+) and 3(-) are signal wires (think those are the...

Ran across a used Cloudlifter from a reputable US retailer this morning and thought I'd pass along the info. A bit of savings over new. Used Cloud Microphones Cloudlifter CL-1 Mic Activator CL-1 B&H Item could be sold at any time, so if it's gone when you look, it's gone......

I took a look at the service manual. There appears to be OPAmps that control the SOLO leds, either sensing input and flickering or full on when SOLO is selected on a channel. These OPAmps plus the OPAmps in the audio signal chain get powered via a cable harness header/plug Power Distribution P1...

Are you using a recommended SD card or one that is of a rated class for speed/data exchange for the machine? Be aware there are counterfeit SD cards out there and buying from a sketchy retailer or ebay could get you something of poor quality that won't work right...

The means of backup is to your PC via the USB connection. I would trust this more than a CD and likely much faster. Did you actually have a problem with an SD card?