Recent content by zhou

i check the pin out of the power supply, +5V /+12V/ -12V, is ok. but the check points on the board +5V is just show 0.6V... and now every LED on the board not lighting, the same, LEDs on the front panel not lighting.. Any suggestions are greatly appreciated... yes, i checked the power supply...

i check the pin out of the power supply, +5V /+12V/ -12V, is ok. but the check points on the board +5V is just show 0.6V... and now every LED on the board not lighting, the same, LEDs on the front panel not lighting.. Any suggestions are greatly appreciated...

Hi ra Hi ramsammy, thanks! i'll check the power supply. and then update...

I burn CP 1.35 MC 1.34 (Provided by ramsammy, thanks! )，and replace my eprom. then power on, the transport A B light flash!......but then off. it still say transport A B C don't exist. maybe CP 1.34 is what i need? i can't find image for CP 1.34, maybe i have to read from mine... 8 pin DIL...

my microlynx don't work now. 3 years ago it work fine just for a album. for me tape work with a computer is mean you can use Melodyne :) now my microlynx shows: transport A B C does not exist，also ACG card. it have CP1.34 and MC 1.34. Can i burn a CP 1.35 replace my CP 1.34. i can only...

i just see it on a flea market...

Hi sam. the function remote model is:Teac cs-63. i have one for Tascam ms-16,same but different pin assign.i'm lucky after change the connector it work.... i have the circuit diagram which in the manual.i can take picture for you.but i don't think can "make" one. i see one on ebay before. DON'T...

the blue line is 15ips. also record di,also roll-off 100hz:) i think if you don't push hard,no need to do this.

yes,i use 15ips.

i also roll-off at 100hz,because recording to tape can bring the low end back? it's right?

i use +6 on ampex 406,407,+6 is hot for that tape, but i found,when i recording bass (use mike),i still can hit the tape at +3 vu,and the sound still good! how you hit tape when recording bass guitar? more over bias is good for bass?

A B test record with protools HD from another place,and playback wtih my DUET and DIGI 001 through AMEK to tape. 4 TRACK: 2 tomtom +1 bd +1snare, no eq...

Hi:sweetbeats..AMEK M1000， it's not a ture recording console,and only 12 tracks working.:)but you can trust it.just sound good!